User manual SONY ICD-37

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

Sponsored Links

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SONY ICD-37. We hope that this SONY ICD-37 user guide will be useful to you.

Lastmanuals help download the user guide SONY ICD-37.


SONY ICD-37 : Download the complete user guide (996 Ko)

You may also download the following manuals related to this product:

   SONY ICD-37 annexe 1 (1962 ko)
   SONY ICD-37 annexe 2 (57 ko)
   SONY ICD-37 annexe 4 (998 ko)
   SONY ICD-37 annexe 5 (998 ko)
   SONY ICD-37 annexe 3 (998 ko)
   SONY ICD-37 DATASHEET (71 ko)

Manual abstract: user guide SONY ICD-37

Detailed instructions for use are in the User's Guide.

[. . . ] 3-047-938-11 (1) IC Recorder Operating Instructions ICD-37/57/67 ©2000 Sony Corporation For the customers in the United States Owner's Record The model number is located at the rear and the serial number is located inside the battery compartment. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Serial No. INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] Message 1 Message 2 Newly recorded message Blank space 1 Select the file. Current file Press FILE repeatedly until the desired file is displayed. 2 Start recording. 2 Speak to the built-in microphone. Current message number Remaining recording time During recording, the OPR indicator lights up in red. You do not need to keep pressing REC START/STOP while recording. 10 3 Stop recording. Basic Operations Press REC START/STOP again. The unit stops at the beginning of the current recording. STOP If you do not change the file after you stop recording, the next time you record you will record in the same file. To listen to the current recording Press REC START/STOP to stop recording, then press NxPLAY/STOP. To review the current recording instantly Press NxPLAY/STOP during recording. To stop recording You can also stop recording by pressing STOP instead of REC START/ STOP. To display the remaining recording time During recording, the remaining recording time is displayed under REMAIN. To display it during stop, press STOP for more than one second. Continued 11 Recording Messages (continued) 1 Tips · You can record for up to 45 minutes (ICD-37)/90 minutes (ICD-57)/ 180 minutes (ICD-67). See page 27. Notes · When the remaining time of recording reaches 1 minute, the remaining time and "END" will flash one after the other in the display window. When the memory is full, recording automatically stops and "FULL" will flash in the display window with an alarm sound. To continue recording, first erase some of the messages (see page 16). · If you press REC START/STOP when the memory is full, "FULL" will flash with an alarm sound. Erase some of the messages before you start recording again (see page 16). · If you press REC START/STOP after you have recorded 99 messages, "FULL" will flash with an alarm sound. Select another file or erase some of the messages (see page 16). Note on recording Noise may be recorded if an object, such as your finger, etc. , accidentally rubs or scratches the unit during recording. 12 Playing Back Messages When playing back a previously recorded message, start from Step 1. When playing back a message you have just finished recording, start from Step 3. 1 Select the file. Current file Basic Operations Press FILE repeatedly until the desired file is displayed. 2 Select the message number. Selected message number Press ­. Total number of messages in the current file for larger message number for smaller message number Continued 13 Playing Back Messages (continued) 3 Start playback. Press NxPLAY/STOP. OPR indicator Date of recording Time of recording During playback, the OPR indicator lights up in green. After playing back one message, the unit stops at the beginning of the next message. When the last message on a file has been played back, the unit stops at the beginning of the last message. 4 Adjust the volume. Turn VOL. 14 To stop playback To Do this stop at the beginning of Press STOP. (Playback Pause function) To resume playback from that point, press NxPLAY/STOP again. The file, the message number and "ALL ERASE" will flash. 3 Press ERASE. To cancel erasing Press STOP before step 3. 17 BAdvanced Operations Moving Messages to a Different File -- Move Function You can move recorded messages to a different file. FILE NxPLAY/STOP e. g. To move the seventh message in the file A to the file C 1 Play back the message you want to move. 2 Press FILE during playback to select the file you want to move the message to. The file and "MOVE" will flash and the first and last 5 seconds of the message will be played back 10 times. 3 Press NxPLAY/STOP. To cancel moving the message(s) Press STOP before Step 3. 18 Notes · The move function does not duplicate a message in another file. When you move a message to another file, the one in the previous file will be deleted. · If you do not press NxPLAY/STOP while the first and last 5 seconds of the message are played back, the display will return to the REMAIN display. In this case, start the procedure from the beginning. Adjusting the Playback Speed You can adjust the speed of the playback with the use of the PLAY SPEED selector on the bottom. Advanced Operations PLAY SPEED selector PLAY SPEED SLOW NORMAL FAST To play back rapidly Set PLAY SPEED to FAST. "FAST" will flash three times in the display window and the playback speed will increase about 50%. To play back slowly Set PLAY SPEED to SLOW. "SLOW" will flash three times in the display window and the playback speed will decrease about 25%. To play messages with normal speed Set PLAY SPEED to NORMAL. 19 Adding a Recording to a Previously Recorded Message You can add a recording to the message being played back. [. . . ] or >+ to display "SENS" and press NxPLAY/STOP. "H (or L)" will flash. 3 Press ­. or >+ to select "H" or "L" and press NxPLAY/STOP. Now the setting is completed. 4 Press MENU to exit the menu mode. 27 Playing Back All Messages in a File Continuously CONT On: You can play back all messages in a file continuously. CONT OFF: Playback stops at the end of each message. 1 Press MENU to enter the menu mode. 2 Press ­. or >+ to display "CONT" and press NxPLAY/STOP. "OFF (or On)" will flash. 3 Press ­. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SONY ICD-37

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SONY ICD-37 will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag