User manual SONY ICD-B25

[. . . ] 3-237-275-11 (1) IC Recorder Operating Instructions ICD-B25 2002 Sony Corporation For the customers in the United States Owner's Record The model number is located at the rear and the serial number is located inside the battery compartment. Record these numbers in the spaces provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Serial No. INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] or > repeatedly to display "TIMER" and press NxPLAY/STOP. "OFF" starts to flash. Other Functions Note The timer cannot be set if the clock has not been set . or > to flash "ON". 4 Press NxPLAY/STOP. "START" is displayed for one second, and then "DATE" will flash in the display window. Continued 27GB Starting Recording at a Desired Time -- Timer Recording (continued) 2 Set the recording start date. · to start recording on a desired date 1 Press NxPLAY/STOP while "DATE" is flashing. or > to select the year digits and press NxPLAY/STOP. 3 Select the month and day digits in the same way. · to record once a week Press . or > to select the day of the week. · to record at the same time every day Press . or > to select "DAILY" and press NxPLAY/STOP. 3 Set the recording start time. 1 Press . or > to select the hour digits and press NxPLAY/STOP. or > to select the minute digits and press NxPLAY/STOP. "END" is displayed for one second, and then the hour digits of the recording end will flash in the display window. 4 5 6 Repeat Step 3 to set the recording end time. or > to select "SP" or "LP" and press NxPLAY/STOP. Press MENU to exit the menu mode. The display will return to normal display and " " is displayed. At the set time, recording starts automatically. " " flashes on the display window during recording. When the recording ends, the unit will stop automatically at the beginning of the newly recorded message. 28GB To stop the timer recording Press xSTOP. To change the timer setting Press . or > in Step 2, 3 or 4 on page 28 to change the year, month, day or time and press NxPLAY/STOP. To cancel the timer recording setting Select "OFF" in Steps 1-3 on page 27 and press NxPLAY/STOP. Notes · You cannot set the timer to record more than one message. · When the timer recording starts, the recording mode selected in Step 5 is automatically selected. When the recording ends, the recording mode is reset to the initial setting. · Make sure that the remaining recording time is long enough for the timer recording. You cannot set the timer if the length of the timer recording exceeds the remaining recording time. However, in the case of recording once a week or everyday, you can set the timer if the remaining recording time is longer than the first recording and for the second or later recording, timer recording stops when there is no more remaining time on the IC recorder. · If 99 messages have been recorded in the selected folder or the memory is full, timer recording will not start. · If the timer is set to start recording before 23:59 and to end recording after 0:00, the recording will stop the next day. [. . . ] 25 Erase, messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Error messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 External microphone . . . . . . . . . . . . . . . . . . . . 13 Overwrite recording . . . . . . . . . . . . . . . . . . . . . [. . . ]