User manual SONY ICF-C1IP

[. . . ] 3-272-042-31(1) A 1 B FM/AM Clock Radio ICF-C1iP Operating Instructions 2 R ES ET There is a tactile dot on the VOL +, N/X, M and PRESET + button. 1 CR2032 FM wire aerial Dream Machine is a trademark of Sony Corporation. AC power cord 3 R ES ET 2 No Power No problem is a trademark of Sony Corporation. g CR2025 There is a tactile dot on the VOLUME +, N/X and PRESET TUNING 3 button. © 2007 Sony Corporation Printed in China WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To reduce the risk of fire, do not cover the ventilation of the apparatus with newspapers, tablecloths, curtains, etc. And do not place lighted candles on the apparatus. The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. [. . . ] · If you use an external polarized AM aerial, be sure to connect the ground cord to the U terminal. The supplied AM aerial cord has no polarity. Tip Adjust the direction of the AM loop aerial for best AM broadcast sound. Note When you replace the battery, keep the AC plug connected to a wall outlet. Otherwise, current time and alarms will be initialized if the replacement is not completed within around one minute. Setting the clock for the first time This unit is preset to the current date and time at the factory, and is powered by the back up battery. All you need to do the first time is just plug it in and select your time zone. Operating the iPod You can enjoy iPod audio by connecting this unit. To use an iPod, refer to the user's guide of your iPod. 2 Press N/X. The iPod begins to play automatically. You can operate the connected iPod by the unit or iPod buttons. Presetting your favourite station --Preset tuning You can preset up to 10 stations in FM (5 stations in FM1, 5 stations in FM2), and 5 stations in AM. To activate the alarm After setting the alarm time, follow these steps: To activate the ALARM A, press ALARM SET A to display ALARM A. To activate the ALARM B, press ALARM SET B to display ALARM B. Notes · The alarm sounds at the set time even if the unit is on. · Make sure the iPod is installed correctly after setting the iPod alarm. Connecting external equipment To listen to sound 1 Connect the AUDIO IN jack of the unit to the line out jack or headphone jack of the external equipment using the audio connecting cable (supplied). To Press N/X To resume play, press it again. > . Compatible iPod models The compatible iPod models are as follows. Update your iPod to use the latest software before you use it. Turn off the iPod OFF, or press and hold u Pause playback Go to the next track Go back to the previous track 1 2 Plug in the unit. Press TIME ZONE for more than two seconds. Area number "3" appears in the display. If you live in the Western European Time zone, you do not need to adjust the area setting. Presetting a station 1 Follow steps 1 to 4 in "Operating the Radio" and manually tune into the station you wish to preset. Area number 1 2 (default) 3 Time zone Eastern European Time/Eastern European Summer Time Central European Time/Central European Summer Time Western European Time/Western European Summer Time iPod nano 2nd generation (aluminium) iPod 5th generation (video) iPod nano 1st generation Locate a point > (forward) or . while listening to (backward) while playing and the sound hold it until you find the point. Locate a point while observing the display Go back to the previous menu Select a menu item or a track for playback > (forward) or . (backward) in pause and hold it until you find the point. MENU* R/r* 2 To doze for a few more minutes Press SNOOZE/BRIGHTNESS. The sound turns off but will automatically come on again after about 5 minutes. The maximum length of the snooze time is 40 minutes. Press and hold the desired PRESET TUNING button for more than two seconds for registration. After the preset has finished, the preset number appears on the display. Example: To preset AM 1 260 kHz onto preset 2 button. To stop the alarm Press OFF to turn off the alarm. The alarm will come on sound again at the same time the next day. If OFF is not pressed, the buzzer alarm sounds continuously for about 3 minutes, and then it stops automatically. The RADIO and iPod sound continuously until OFF is pressed. Audio connecting cable (supplied) To external equipment 3 4 Press TIME SET + or ­ repeatedly until the desired number appears. · If the backup battery is exhausted, the alarm will not work in the event of power interruption. [. . . ] Press TIME SET +/­ to set the desired alarm mode (RADIO, BUZZER or iPod) and press ALARM SET A. If you select the RADIO or iPod, press TIME SET +/­ to set the wake up volume and press ALARM SET A. To turn off the unit before the preset time Press OFF. To use both sleep timer and alarm You can fall asleep to the radio and also be awakened by the radio or buzzer alarm at the preset time. To set ALARM B, follow the same steps above using ALARM B instead of ALARM A. To change the display between ALARM TIME A and ALARM TIME B, press TIME ZONE/ALARM DISPLAY. Notes · When you use the radio alarm, the timed alarm sounds with the last broadcasting station tuned to before the power went off. [. . . ]