User manual SONY INT-W200

[. . . ] 45 About The Speakers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 About The Modem. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 About The Microphone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 About The Mouse And Keyboard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] If you plugged the computer into a power strip or Uninterruptible Power Supply (UPS), make sure the power strip or UPS is turned on and working. Check that the monitor is plugged into a power source and turned on. Check that the brightness and contrast controls are adjusted correctly. See the manual that came with your display for details. Check that the computer is not in stand by mode. Why did my computer or software application stop responding?You can try to locate and close the software application that has stopped responding. The Windows Task Manager window appears. From the Applications tab, locate the application that has the status message, "Not responding. " Select the application that has a Not Responding status and click End Task. Windows attempts to close the application. If your computer does not respond or the application does not close, try the following steps: 1 2 3 Save any open files, if possible. Click Restart. 40 About VAIO Digital Studio Computer Functions If your computer still does not respond and you cannot restart, shut down your computer by pressing and holding the power switch for more than six seconds. If the software application continues to stop responding or causes your computer to stop responding, contact the software publisher or designated technical support provider. Pressing and holding the power switch for more than six seconds, may result in the loss of data from files that are currently open. Why does the Windows operating system stop responding during shutdown?Select "I/O Device Configuration" and press Enter. Use the arrow keys to highlight Parallel Port Mode and press Enter. You can toggle between the Normal (bi-directional), EPP, ECP, and ECP+EPP options using the directional arrow keys. 6 7 Select the desired setting displays, and press Enter. Press the F10 key to Save and Exit. How do I change the video resolution of my display?1 2 3 4 5 Click Start in the Windows taskbar and then select Control Panel. Select Appearances and Themes, then select "Change the screen resolution. " Click the Settings tab. Change the Screen resolution and Color quality to the desired levels. Click Apply and then click OK. 43 VAIO Digital Studio Computer Quick Start About Your System Recovery CDs My files are corrupted or deleted. How do I recover software applications that came with my computer?See "Reinstalling software applications" in the online User Guide for more information. How do I recover drivers that came with my computer?See "Reinstalling device drivers" in the online User Guide for more information. [. . . ] For normal cleaning, hold the disc by its edge and use a soft cloth to wipe the surface from the center out. If the disc is badly soiled, moisten a soft cloth with water, wring it out well, and use it to wipe the surface of the disc from the center out. Wipe off any remaining moisture with a dry soft cloth. 63 VAIO Digital Studio Computer Quick Start About Support Resources Sony provides several support options for your Sony computer. When you have questions about your computer and the preinstalled software, check these sources for answers, in the following sequence: VAIO Quick Start VAIO Computer User Guide The Quick Start contains information on how to set up your computer quickly and easily. [. . . ]