User manual SONY KDL-32EX500

[. . . ] Should the fuse in the plug supplied need to be replaced, a 10 AMP fuse approved by ASTA or BSI to BS 1362 (i. e. , marked with or ) must be used. When an alternative type of plug is used it should be fitted with a 10 AMP FUSE otherwise the circuit should be protected by a 10 AMP FUSE at the distribution board. If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. [. . . ] The Widget icons should appear under USB icon under "Network" in the Home Menu. ~ · MAC address and IP address are transmitted automatically from the TV to servers while internet connection is available. The servers are under the control of Sony and MAC address will never be transmitted to the servers controlled by the other parties. · Widgets may be changed or terminated without prior notification to the user. 1 Press HOME. 2 Press G/g to select "Network". 3 Press F/f to select the desired Widget to be displayed or simply select "AppliCast" icon to display your preferred list of Widgets. Using Home Network Features 4 Follow the instruction on the Widget. To return to single picture mode Press RETURN. To Add or remove Widgets in AppliCast You can add to or remove from the Widget list. From Widget: 5 While you are displaying the Widget, press OPTIONS. 6 Select "Add to AppliCast" or "Remove from AppliCast". Up to 30 Widgets can be registered in "AppliCast". From "Network" in the Home Menu: 7 Follow STEP1-2 above. 8 Press F/f to select the desired Widget, then press OPTIONS. 9 Follow STEP6. z · There are three Widgets already in the set that don't require internet connection. They are "How to use AppliCast", "Analogue Clock", and "Calendar". (Continued) 29 GB Enjoying Photo/Music/ Video Files via the Network You can enjoy photo/music/video files on the server easily by selecting an icon on the Home Menu of the TV. manual for the network device being used. Even files conforming to one of the file formats given above cannot be played in some cases. 3 Press F/f to select "Network Settings", then press . 4 Select "Network", then press . 5 Select "IP Address Settings", then press . 2 Press HOME. 3 Press G/g to select "Settings". 4 Press F/f to select "Network Settings", then press press . . 6 Select an item, and press . When you select "DHCP (DNS automatic)" 5 Select "Server Display Settings", then Using Home Network Features 6 Select the server you want to display on the Home Menu, then press Go to step 7. When you select "DHCP (DNS manual)" 7 Select "Yes", then press . If you cannot connect to your home network The TV can check if the server is being correctly recognised. Set "Primary DNS"/"Secondary DNS" using F/f/g and the number buttons. When you select "Manual" Set the following items using F/f/g and the number buttons. · IP Address · Subnet Mask · Default Gateway · Primary DNS/Secondary DNS If your ISP has a specific proxy server setting 1 Press HOME. 2 Press G/g to select "Settings". 3 Press F/f to select "Network Settings", then press . . 4 Select "Server Diagnostics", then press 5 Select "Yes", then press . The server diagnostic starts. When the server diagnostic is complete, the diagnostic result list appears. Press OPTIONS, then press F/f to select "Proxy Set-up" and press . 8 Press g to select "Test", then press . [. . . ] · When installing optional equipment, leave some space between the optional equipment and the TV. · Check the aerial/cable connection. · Keep the aerial/cable TV cable away from other connecting cables. The TV turns off automatically (the TV enters standby mode). [. . . ]