User manual SONY KDL-40Z4100

[. . . ] 3-297-695-12(1) LCD Digital Color TV Operating Instructions KDL-40Z4100 KDL-46Z4100 © 2008 Sony Corporation Owner's Record The model and serial numbers are located at the rear of the TV. Record these numbers in the spaces provided below. Refer to them whenever you call upon your Sony dealer regarding this TV. CAUTION Use the following Sony TVs only with the following WALL-MOUNT BRACKET or TV-stand. KDL-40Z4100 KDL-46Z4100 Sony Wall-Mount Bracket Model No. [. . . ] Display the Grid Options and select re-sort numerically then press . Confirm the numerical re-sort by selecting yes to complete the task. The Guide appears each Highlight SETUP on the Service Bar then press v to highlight Change default options time TV is turned on and then press . Highlight General defaults and press to display options in the Panel Menu. Set auto guide to on to have the Guide appear when the TV powers on. Lock/unlock video Allows you to set the Video Window display to remain on a single channel (locked) or change channels (unlocked) as you navigate through Listings. While in Service Bar, press OPTIONS to display the Listings Options in the Panel Menu. The locked video option displays a single channel. 36 Using BRAVIA Sync with Control for HDMI The BRAVIA Sync function on this TV communicates with other Sony equipment supporting the Control for HDMI function. To connect Sony equipment with Control for HDMI Use an HDMI cable that bears the HDMI logo for connection. See pages 12 to 15 or see the HDMI connection shown in the Quick Setup Guide provided with the TV documentation. Setting the Control for HDMI The Control for HDMI function must be set up in order for the TV to communicate with other Control for HDMI enabled equipment. See page 51 for information on how to set up this TV's Control for HDMI function. For other equipment, refer to its operating instructions. Available options using Control for HDMI The following operations are available after you connect the supported Sony equipment with Control for HDMI function to your TV: · Automatically turn off the connected equipment when you turn off the TV. · The TV will automatically turn on and select the respective HDMI input through the connected equipment by One-Touch-Play. · Equipment listed under the External Inputs on the XMBTM will turn on automatically when selected, see pages 5 and 39. · Possible operations with BRAVIA Sync buttons, see page 20. When a Sony A/V receiver with BRAVIA Sync is connected, the following additional operations are possible: · Turning on the A/V receiver when the TV is turned on. · Automatically switching to the audio output of the A/V receiver's attached speakers. · Adjusting the volume and muting of the A/V receiver with the TV's remote control. Using DIGITAL MEDIA PORT Adapter Connecting a DIGITAL MEDIA PORT (DMPORT) adapter lets you display photos and play videos and music from a portable player on your TV. The DMPORT adapter's menu and portable player can be controlled via the TV's remote control. The DMPORT input can be selected by pressing INPUT. [. . . ] · Check the polarity of the batteries or replace the batteries. · Point the remote control at the remote control sensor located at the front of the TV. · Keep the remote control sensor area clear from obstacles. · Fluorescent lamps can interfere with your remote control operation; try turning off the fluorescent lamps. [. . . ]