User manual SONY KDL-52XBR2

[. . . ] 2-892-388-11(1) LCD Digital Color TV Operating Instructions KDL-52XBR2 KDL-52XBR3 © 2006 Sony Corporation Owner's Record The model and serial numbers are located at the rear of the TV. Record these numbers in the spaces provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. Serial No. For Your Convenience Please contact Sony directly if you: z z Have questions on the use of your television after reading your manual Experience difficulty operating your television Contact Sony Customer Support at: http://www. sony. com/tvsupport or to speak with a support representative: United States 1-800-222-SONY (7669) 8:00 AM - 10:00 PM (EST) Mon - Fri 10:30 AM - 7:15 PM (EST) Sat - Sun Canada 1-877-899-SONY (7669) 8:00 AM - 6:00 PM (Eastern) 8:00 AM - 5:00 PM (Western) Sony will work to resolve your questions more quickly than your retailer or place of purchase. Please Do Not Return the Product to the Store 2 WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. NOTIFICATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] To scan quickly through channels, press and hold down either ­/+. In the MENU screen, these buttons serve as up/down buttons. In the MENU screen, these buttons serve as left/right buttons. Press to cycle through the video inputs. If you set a certain input to Skip in Label Video Inputs, then the input will not appear. In the MENU screen, this button serves as confirming the selection or setting. Press to display MENU with TV functions and settings (see "Overview of MENU" on page 31). 5 MENU 6 PIC OFF/TIMER Lights up in green when Picture Off is activated. Lights up in orange when the timer is set. When the timer is set, this LED will remain lit even if the TV is turned off. 7 STANDBY LED Lights up in red when your TV is in the PC standby mode. If the LED blinks in red continuously, this may indicate the TV needs servicing (see contacting Sony information on page 2). Lights up in green when the TV is turned on. Receives IR signals from the remote control. Do not put anything near the sensor, as its function may be affected. Outputs the audio signal. 8 POWER LED 9 (IR) Infrared Receiver/Light Sensor q; Speaker The CHANNEL + button has a tactile dot. Use it as a reference when operating the TV. 30 Using the Menus Overview of MENU MENU provides one-button access for controlling your TV. It enables you to perform a variety of tasks intuitively with a control panel on the screen rather than a variety of remote control button presses. When you press the MENU button, you can select from basic TV functions: External Inputs, Favorites, Cable, Antenna and Settings. TV/VIDEO SLEEP POWER TV POWER 1 Press MENU on the remote. Press MENU to exit. A dot appears next to the icon of the currently active input (External Inputs, Cable, and Antenna only). When the TV is displaying the input from a connected PC, the menu only shows PC settings. For more information about PC settings, see page 46. Using the Menus MENU External Inputs Favorites C BD/DVD DVR/VCR SAT/CABLE FUNCTION TV Cable Antenna Settings ENT JUMP ANT MODE PICTURE FREEZE SURROUND SOUND WIDE GU ID DIS PL AY Select from connected equipment E Exit: MENU 2, 3 PREV RN TU RE TO O LS MENU 1 REPLAY ADVANCE NEXT PLAY MENU Description External Inputs The External Inputs feature lets you select the external inputs connected to your TV. You can also assign a label using Label Video Inputs in the Setup settings (see page 43). External Inputs Exit Video 1 Video 2 Camcorder Video 3 DVD Video 4 DVR Video 5 Video 6 Video 7 Video 8 Video 9 Edit Video Labels Exit: MENU 1 Highlight External Inputs on the MENU control panel and press and press . [. . . ] Keep the remote control sensor area clear from obstacles. If you are using the TV to change channels, first press TV (FUNCTION) once, and the TV indicator lights up. If you are using another device to change channels, be sure you have not inadvertently switched your TV from the channel 3 or 4 setting. If you are using another device to change channels, be sure to press FUNCTION for that device. [. . . ]