User manual SONY KDL-52Z4500

[. . . ] LCD Digital Colour TV KDL-52Z4500 KDL-46Z4500 Instructions on "Installing the Wall-Mount Bracket" are not supplied in the form of a separate leaflet with this TV. These installation instructions are included within this TV's instructions manual. For useful information about Sony products 4116578112 KDL-40Z4500 4-116-578-11(2) Printed in Spain © 2008 Sony Corporation 4-116-578-11(2) NOTICE FOR CUSTOMERS IN THE UNITED KINGDOM A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a 10 AMP fuse approved by ASTA or BSI to BS 1362 (i. e. , marked with or ) must be used. [. . . ] · You can operate the connected Sony equipment that has the BRAVIA Sync logo by the TV remote by pressing: ­ N/x/X/m/M to operate the connected equipment directly. ­ SYNC MENU to display the menu of the connected HDMI equipment on the screen. After displaying the menu, you can operate the menu screen by using F/f/G/g and . ­ OPTIONS to display "Device Control", then select options from "Menu", "Options", and "Content List" to operate the equipment. ­ Refer to the instruction manual of the equipment for available control. The control for HDMI settings must be set on both the TV side and connected equipment side. See "HDMI Set-up" on page 46 for the TV side settings. For settings on the connected equipment, refer to the operating instructions for that equipment. To connect the equipment that is compatible with control for HDMI Connect the compatible equipment and the TV with a HDMI cable. When connecting an audio system, be sure to also connect the DIGITAL AUDIO OUT (OPTICAL) socket of the TV and the audio system using an optical audio cable. For details, see page 24. 30 GB Operating Optional Equipment using the TV Remote Buttons for using optional equipment For details, refer to the operating instructions supplied with the connected equipment. Item Description 1 "/1 Turns on or off the optional equipment you have selected with the function buttons. Allows you to operate the corresponding equipment. For details, see "Programming the remote" on page 31. · . />: Goes to the beginning of the previous/ next title/chapter/scene/ track. · / : Replays the scene/ briefly fast forwards the scene. · m/M: Fast reverses/fast forwards the disc when pressed during playback. · N: Plays a disc at normal speed. · x: Stops the playback. 2 Function buttons 3 BD/DVD operating buttons Using Optional Equipment 4 DVD record · z REC: Starts the buttons recording. · X REC PAUSE: Pauses the recording. · x REC STOP: Stops the recording. 5 F1/F2 · Selects a disc when using a disc changer. · Selects a function when using a combination unit (e. g. Displays the top menu of the BD/DVD disc. 6 BD/DVD MENU 7 BD/DVD TOP MENU Programming the remote This remote is preset to operate Sony TVs, and most Sony Blu-ray disc players, DVD players, DVD recorders, and audio systems (Home Theatre, etc. ). To control Blu-ray disc players, DVD players, and DVD recorders of other manufacturers (and some other Sony models), programme the remote as follows. z · The N button has a tactile dot. [. . . ] Digital channels are not · Contact a local installer to find out if digital transmissions are provided displayed in your area. · Upgrade to a higher gain aerial. General Distorted picture and/or sound · Keep the TV away from electrical noise sources such as cars, motorcycles, hair-dryers or optical equipment. · When installing optional equipment, leave some space between the optional equipment and the TV. · Check the aerial/cable connection. [. . . ]