User manual SONY KP-61HS30

[. . . ] 4-081-143-11(1) Projection TV Operating Instructions KP-43HT20 KP-53HS20 KP-53HS30 KP-61HS20 KP-61HS30 © 2001 Sony Corporation WARNING To prevent fire or shock hazard, do not expose the projection TV to rain or moisture. Note on convergence adjustment Before you use your projection TV, make sure to adjust convergence. For details, see "Adjusting the Convergence Automatically ­ FLASH FOCUSTM ­" on page 33. Note to CATV system installer CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION RISQUE DE CHOC ELECTRIQUE, NE PAS OUVRIR This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. Use of this television receiver for other than private viewing of programs broadcast on UHF, VHF, transmitted by cable companies or satellite for the use of the general public may require authorization from the broadcaster/cable company and/or program owner. PRECAUCION RIESGO DE CHOQUE ELECTRICO NO ABRIR CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. NOTIFICATION This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. [. . . ] Cancel by pressing SLEEP until "SLEEP OFF" appears. qa DISPLAY Press to display the channel number, current time and channel label (if set). To turn the display off, press DISPLAY again. qs TV/VIDEO Press repeatedly to scroll through available video inputs: TV, VIDEO 1, VIDEO 2, VIDEO 3, VIDEO 4, VIDEO 5 and VIDEO 6. If you select Skip as a Video Label in the Setup menu, your projection TV will skip the video input you selected. (see "Video Label" on page 64) qd MTS/SAP Press to scroll through the Multi-channel TV Sound (MTS) options. (see "MTS" on page 50) qf PIC MODE Press PIC MODE repeatedly to directly choose one of five different video modes that best suits the program you are watching. Vivid: Select for enhanced picture contrast and sharpness. Standard: Select to display a standard picture for normal viewing environments. Movie: Select to display a finely detailed picture for low light environments. Pro (Professional): Select to display a picture with minimum enhancements. When you select each mode, you can also adjust the picture quality (such as Brightness, Color, etc. ) to suit your taste. For details, see "Mode" on page 48. 38 Using the Features Watching the Digital TV When you have connected the DTV receiver, you can enjoy digital TV programs. This projection TV is capable of receiving the 1080i, 720p, 480p and 480i digital TV formats. This projection TV is not capable of displaying a native 720p format signal. When the 720p format signal is received, it is converted into a 480p format signal. To view a digital TV program Using the Features 1 2 3 4 Connect the DTV receiver to VIDEO 5 or 6 IN on the projection TV. (for details, see page 28) Press TV/VIDEO to select VIDEO 5 or 6. Select a digital channel on the DTV receiver. For details, see the Operating Manual of the DTV receiver. Adjust the volume on this projection TV as necessary. Whenever you find that the picture blurs, press FLASH FOCUS. (for details, see page 33) The optimum convergence alignment varies with digital TV formats. 39 Using the Features Using Favorite Channels The Favorite Channel feature lets you select programs from a list of favorite channels that you preset. To display a list of your favorite channels: Your Favorite Channel options can be set automatically or manually. The factory setting for Favorite Channel is Auto. When Favorite Channel is set to Auto, the last eight channels selected with 0-9 buttons will be set as Favorite Channel options. If you want to input your own selections as Favorite Channel settings, see "Favorite Channel" on page 52. 1 Press FAVORITES. The Favorite Channel options appear. Preview window 2 Move the joystick up or down to highlight the channel you want to watch. The program on that channel appears in the preview window. [. . . ] The master password clears your previous password; it cannot be used to temporarily unblock channels. Be sure you have not inadvertently switched your projection TV from channel 3 or 4 setting if you are using another device to change channels. If you are using another device to control channels, be sure the "function" button for that device has been pressed, or the slide switch is set correctly. For example, if you are using your cable to control channels, be sure to press SAT/CABLE. [. . . ]