User manual SONY KP-61V85

[. . . ] 4-077-172-11(1) Color Rear Video Projector Operating Instructions KP-48V85 KP-53V85 KP-61V85 © 2000 Sony Corporation WARNING To prevent fire or shock hazard, do not expose the TV to rain or moisture. CAUTION When using TV games, computers and similar products with your projection TV, or viewing a TV station whose logo always stays on the screen, keep the brightness and contrast functions at low settings. If a fixed (nonmoving) pattern such as a station logo is left on the screen for long periods of time, especially at a high brightness or contrast setting, the image can be permanently imprinted onto the screen. These types of imprints are not covered by your warranty because they are the result of misuse. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION RISQUE DE CHOC ELECTRIQUE, NE PAS OUVRIR Note on Caption Vision This television receiver provides display of television closed captioning in accordance with §15. 119 of the FCC rules. PRECAUCION RIESGO DE CHOQUE ELECTRICO NO ADRIR NO ABRIR CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Note on convergence adjustment Before you use your projection TV, make sure to adjust convergence. [. . . ] Sun 12:00AM 2 Move the joystick up or down until the time (hours Move Select Exit MENU and minutes) that you want the projection TV to remain on is displayed, and then press . 3 Move the joystick up or down to set the time duration (maximum of 6 hours) and press . 4 Move the joystick up or down to select the desired channel and press . The TIMER/STAND BY indicator on your projection TV will be lit. To cancel your timer setting, press RESET while in the On/Off Timer window. Performing Auto Program will erase all Timer settings. 37 Adjusting Your SET UP (menus) (continued) ch Using the Channel Set Up Menu Channel Set Up Channel Caption Favorite Channel :Auto Channel Skip/Add Auto Program Cable: On Channel Caption Easy recognition of the channel you are watching ch Move Select Exit MENU For detailed information on using the remote control to modify menu settings, refer to "Learning Menu Selection" on page 33. You can add a caption for up to 32 channels of VHF/ UHF input. With the Channel Caption window open: and then move the joystick up or down to 1 Press select the desired channel. You can view the channel that is selected with the Channel Caption menu in the sub screen. 3 Move the joystick up or down to display the first letter or number of the caption and press to select it. Repeat until up to five digits are selected. To erase a caption, press RESET. Channel Caption Channel: Caption: ­ ­­ ­ ­ ­­­ Move Select Exit MENU To select the Channel Set Up menu: Display ch Favorite Channel User's favorite channels / Highlight ch / The Favorite Channel feature enables easy access to the eight channels that you preset (or the last channel that you were watching). (for details on how to set up this feature, see "Setting and Selecting Favorite Channel" on page 40) Select MENU 38 Channel Skip/Add Skips unnecessary channels. After AUTO SET UP, you can erase unnecessary Channel Skip/Add 1: Skip channels from the channel preset memory. 2: Skip 3: Add 4: Add With the Channel Skip/Add window open: 5: Add 6: Add 1 Move the joystick up or down to select the desired 7: Add 8: Add channel. You can view the channel that is selected Add 9: Select a channel Move Select Exit MENU with the Channel Skip/Add menu in the sub screen. You can also use CH +/­ or 0­9 and ENTER buttons. 3 Move the joystick up or down to select Skip, and press The selected channel will be erased. If you want to re-enter the skipped channel, follow the steps above and select Add. ch Auto Program Automatic channel presetting Select Yes to signal the projection TV to automatically program all receivable channels. When all the receivable channels are stored, the lowest numbered channel is displayed. Select On if your projection TV is connected to a cable system. Select Off if your projection TV is connected to an antenna. Cable Cable system setting 39 Adjusting Your SET UP (menus) (continued) Setting and Selecting Favorite Channel The Favorite Channel feature of your projection TV enables easy access to the eight channels that you preset (or the last channel that you were watching). Your Favorite Channel options can be set automatically or manually. The factory setting for "Favorite Channel" is "Auto. " When "Favorite Channel" is set to "Auto, " the last eight channels selected with the 0­9 buttons will be set as Favorite Channel options. [. . . ] 22 Speaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 (On/Off/SAVA SP/Center) Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Splitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 SYSTEM OFF button . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]