User manual SONY MHC-610

[. . . ] Do not, under any circumstances, place the CD player/stereo cassette deck on top of the A/V control amplifier. This caution label is located inside the unit. Do the following procedure 1 to 6 to hook up your system using the supplied cords and accessories. If you set up the stereo system vertically Be sure to place the A/V control amplifier on top of the CD player/stereo cassette deck. [. . . ] The tracks continue playing in their original order. You can start Shuffle Play during normal play by pressing PLAY MODE repeatedly to select "SHUFFLE". To skip a track, turn the jog dial clockwise (or press + on the remote). Press FUNCTION repeatedly until "CD" appears in the display, then place a CD. "J" appears and then all the tracks play in random order. You can make a program of up to 32 tracks from all the CDs in the order you want them to be played. Press FUNCTION repeatedly until "CD" appears in the display, then place a CD. Turn the jog dial until the desired track appears in the display. "STEP" and the programmed playing order appear, followed by the total playing time. Skip step 3 to select tracks from the same disc. All the tracks play in the order you selected. Skip step 4 to select tracks from the same disc. Note that you cannot use Tape Select Edit for discs containing more than 20 tracks. Repeat steps 5 and 6 for tracks from the same disc or steps 4 to 6 for tracks from another disc to program the remaining tracks to be recorded on side B. The required tape length for the currently selected CD appears, followed by the total playing time for side A and side B respectively. Every time you press the button, the display changes as follows: DBFB (level) n DBFB OFF 2 Press OPEN/CLOSE or place your hand to the sliding sensor to slide the panel. The audio emphasis menu lets you select the sound characteristic according to the sound you are listening to. The personal file function (see "Making a personal audio emphasis file") lets you store your own effects. "SUR " appears if you select an effect with surround effects. Use the jog dial (or press FILE SELECT V/v on the remote repeatedly) to select the preset you desire. You don't need to press ENTER/NEXT when you use the remote. The spectrum analyzer display changes each time you cycle through the information display (e. [. . . ] The display starts flashing as soon as you plug in the power cord even though you haven't turned on the power (demonstration mode). Press DISPLAY/DEMO when the power is turned off. The demonstration mode appears automatically the first time you plug in the power cord. If there is a power outage lasting longer than a day, do the following again: -- Clock setting (see "Step 2: Setting the time") -- Preset stations (see "Step 3: Presetting radio stations") -- Timer settings (see "Waking up to music" and "Timer-recording radio programs"). [. . . ]