User manual SONY MHC-W550

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. Do not, under any circumstances, place the CD player/Stereo casette deck on top of the A/V control ampilifier. The following caution label is located inside the unit. [. . . ] P once in stop mode or twice while playing. Playing CDs without interruption â­Â­ Non-Stop Play You can play CDs without pausing between tracks. Clear a track from the end Clear a specific track Clear the entire program The program you made remains in the CD player even after it has been played back. --" appears instead of the total playing time during programming, this means: ­ you have programmed a track number which exceeds 20 ­ the total playing time has exceeded 100 minutes. Press FUNCTION repeatedly until "CD" appears in the display, then place a CD. press and hold down · P until "NON STOP PLAY" appears and the disc number blinks. You can record from CD, tape, or radio as you like. For example, you can record just the songs you want or record from the middle of the tape. If you want to record from the reverse side, press ª so that ª (for reverse side) lights up. â· When you want to reduce the hiss noise in lowlevel high-frequency signals, press DOLBY NR so that "DOLBY NR B" appears after pressing REC. Dolby NR and DIRECTION MODE ( a or RELAY) is off when the mains AC power supply is switched off. Press FUNCTION repeatedly until the source you want to record (e. Select a (or RELAY) to record on both sides. You can record tracks from all the CDs in the order you want. To record the flash effect, use the analog MD/ VIDEO 1 OUT connections or this unit's tape deck. With the Wave function, you can fluctuate the graphic equalizer automatically. This effect can be used with any source, but it cannot be recorded. Turn the jog dial while holding WAVE to select a different wave length (WAVE 1~10). You can reinforce the bass, create a more powerful sound, and listen with headphones. The audio emphasis menu lets you select the sound characteristic according to the sound you are listening to. The personal file function (see "Making a personal audio emphasis file" on page 30) lets you store your own effects. Every time you press the button, the display changes as follows: DBFB n "DBFB "DBFB ". [. . . ] The demonstration mode appears automatically the first time you plug in the power cord. If there is a power outage lasting longer than a day, do the following again: -- Clock setting (see "Step 2: Setting the time") -- Preset stations (see "Step 3: Presetting radio stations") -- Timer settings (see "Waking up to music" and "Timer-recording radio programs"). Insert only the stripped portion of the speaker cord into the SPEAKER jack. Demagnetize the tape heads and the metal parts that have contact with the tape every 20 to 30 hours of use with a separately sold demagnetizing cassette. [. . . ]