User manual SONY MHC-RX30

[. . . ] The CLASS 1 LASER PRODUCT MARKING is located on the rear exterior. This stereo system is equipped with the Dolby Btype noise reduction system*. * Manufactured under license from Dolby Laboratories Licensing Corporation. DOLBY and the double-D symbol a are trademarks of Dolby Laboratories Licensing Corporation. Contents Disc size Play time Audio + Video (moving pictures) 12 cm/8 cm 74 min. /20 min. Audio 12 cm/8 cm 74 min. /20 min. Note on VIDEO CDs This system conforms to VIDEO CDs without PBC functions (Ver. [. . . ] 2. 0) Select "2) TIME SEARCH" before you start playing the VIDEO CD, to light the PBC OFF indicator and play without PBC functions. 32 To switch to a 12 frame display You can switch the digest display from 9 to 12 frames. 3 Proceed with steps 1 and 2 of "Locating the track you want". The first frames of tracks 1 through 12 are displayed. To switch back to the 9 frame display, repeat this operation. Locating a section within a track ­­ Track Digest You can have the CD player divide a VIDEO CD track into either 9 or 12 different sections and display the first scene of each section on the TV screen. This might be useful when playing discs with few track divisions, such as movies. This function cannot be used during menu playback of VIDEO CDs with PBC functions (Ver. 2. 0). To display the next 9 or 12 tracks Press NEXT. The first frame of tracks 10 through 18 (or 13 through 24) are displayed. When there are more tracks in the disc, "+" appears in the upper right corner of the TV screen. To display previous tracks, press PREV. 1 2 3 Start playing the VIDEO CD track you want. Press 4 to select "4) TRACK DIGEST. " The current track is divided into 9 sections (in default setting) and the first frame of each section is displayed. Do the following procedure to change the repeat mode. To repeat All the tracks on the current CD All the tracks on all CDs Only one track Press PLAY MODE repeatedly until "1 DISC" appears in the display. PLAY MODE repeatedly until "ALL DISCS" appears in the display. REPEAT repeatedly until "REPEAT 1" appears in the display while playing the track you want to repeat. 36 Playing the CD tracks in random order ­­ Shuffle Play You can play all the tracks on one CD or all CDs in random order. (Power) To cancel Shuffle Play Press PLAY MODE repeatedly until "SHUFFLE" or "PROGRAM" disappears from the display. The tracks continue playing in their original order. To select a desired CD Press DISC 1~3. Tips · You can start Shuffle Play during normal play by pressing PLAY MODE repeatedly to select "SHUFFLE". · To skip a track, turn the jog dial clockwise (or press + on the remote). 1 DISC 1~3 32 Jog dial 1 2 Press FUNCTION repeatedly until "CD" appears in the display, then place a CD. Press PLAY MODE repeatedly until "1 DISC SHUFFLE " or "ALL DISCS SHUFFLE" appears in the display. "ALL DISCS" shuffles all the CDs in the player. "1 DISC" shuffles the CD whose DISC indicator is green. 3 Press CD (P. "J" appears and then all the tracks play in random order. 37 Programming the CD tracks ­­ Program Play You can make a program of up to 32 tracks from all the CDs in the order you want them to be played. (Power) 1 2 3 4 Press FUNCTION repeatedly until "CD" appears in the display, then place a CD. Press PLAY MODE repeatedly until "PROGRAM" appears in the display. Press one of the DISC 1~3 buttons to select a CD. Turn the jog dial until the desired track appears in the display. Disc number SYNC 1 3 7 Total playing time (including selected track) VOLUME ALL 1 DISCS PROGRAM SHUFFLE REPEAT 1 STEP ß Track number 5 Press ENTER/NEXT. The track is programmed. [. . . ] After pressing ( (9) or §, there is a mechanical noise, "EJECT" appears in the display, and the unit enters standby mode automatically. · The cassette tape was not inserted correctly. Eject the tape and turn the power back on. If other troubles not described above occur, reset the system as follows: 1 Unplug the power cord. 4 Press to turn on the power. at the The system is reset to the factory settings. [. . . ]