User manual SONY MHS-TS22/L

[. . . ] This Class B digital apparatus complies with Canadian ICES-003. This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. For customers in the U. S. A. If you have any questions about this product, you may call: Sony Customer Information Center 1-800-222SONY (7669). The number below is for the FCC related matters only. Regulatory Information Declaration of Conformity Trade Name: SONY Model No. : MHS-TS22/L Responsible Party: Sony Electronics Inc. Telephone No. : 858-942-2230 This device complies with Part 15 of the FCC Rules. [. . . ] CPU: MMX Pentium 200MHz or faster Application: Windows Media Player (This must be installed to play back movies. ) Others: (USB) port (This must be provided as standard), disc drive For Macintosh users When using ImageMixer VCD2 OS: Mac OS X (v10. 1. 5 or later) CPU: iMac, eMac, iBook, PowerBook, PowerMac G3/G4/G5 series Memory: 128 MB or more Hard disk: Available memory required for installation: 250 MB or more Available free hard disk space recommended: 4 GB or more (depending on the size of the image files edited) Display: Minimum 1 024 × 768 dots, 32 000 colors (This product will not operate correctly at less than 1 024 × 768 dots or 256 colors. ) 74 Application: QuickTime 4 or later (QuickTime 5 recommended) Other: Disc drive When only copying pictures recorded on a "Memory Stick Duo" on a computer OS: Mac OS 9. 1/9. 2 or Mac OS X (v 10. 0/v 10. 1/v 10. 2/v 10. 3) Application: QuickTime 3. 0 or later (This must be installed to play back movies. ) Others: (USB) port (This must be provided as standard) · When you connect your camcorder to a Macintosh computer using a USB cable (supplied), you cannot copy pictures recorded on a tape to the computer. To copy recordings from a tape, connect your camcorder to the computer with an i. LINK cable (optional) and use the standard software in the OS. Installing the software and "First Step Guide" on a computer You need to install the software etc. , with the supplied CD-ROM on your computer before connecting your camcorder and your computer. Once you install it, the installation is not required thereafter. The software to be used varies depending on the OS system you are using. Windows computer: Picture Package (including ImageMixer VCD2) Macintosh computer: ImageMixer VCD2 For the details on the software, refer to "First Step Guide". Installing on a Windows computer Log on as Administrators for installation for Windows 2000/Windows XP. Using a computer 1 Confirm that your camcorder is 2 Turn on the computer. not connected to the computer. Close all applications running on the computer before installing the software. 3 Place the CD-ROM in the disc drive of your computer. The installation screen appears. Continued 75 Installing the software and "First Step Guide" on a computer (Continued) If the screen does not appear Double-click [My Computer]. Double-click [PICTUREPACKAGE] (Disc drive). * * Drive names (such as (E:)) may vary depending on the computer. 7 Read [License Agreement], check [I accept the terms of the license agreement] when you agree, then click [Next]. 4 Click [Install]. 8 Select where to save the Depending on the operating system on the computer, a message appears notifying you that "First Step Guide" cannot be installed automatically with the InstallShield Wizard. In such a case, manually copy "First Step Guide" to your computer according to the message's instructions. software, then click [Next]. 5 Select the language for the 9 Click [Install] on the [Ready to Install the Program] screen. The installation of Picture Package starts. application to be installed, then click [Next]. 6 Click [Next]. 76 10 Click [Next] to install the "First Step Guide. " Depending on the computer, this screen may not be displayed. In such a case, skip to step 11. Click [Next]. Click [Finish]. Follow the on-screen instructions until installation of "First Step Guide" is complete. 11 Click [Next], then follow the 13 Follow the steps below to install Only displayed with Windows XP Service Pack1 (SP1). You cannot use a USB cable (supplied). 81 Creating a DVD (Direct Access to "Click to DVD") (Continued) 3 Slide the POWER switch down to turn on the PLAY/EDIT lamp. 4 Insert a recorded cassette into your camcorder. CAPTURING: The picture recorded on the tape is being copied to the computer. CONVERTING: The picture is being converted to the MPEG2 format. WRITING: The picture is being written onto the DVD. · If you use a DVD-RW/+RW which has other data stored on it, the message [This is a recorded disc. Delete and overwrite?] appears on the LCD screen of your camcorder. When you touch [EXEC], the existing data is erased and new data is written. 5 Connect the Handycam Station to a computer via an i. LINK cable (optional) (p. 81). · When you connect your camcorder to a computer, make sure you insert the connector in the correct direction. If you insert the connector forcibly, it may be damaged, and causes a malfunction of your camcorder. · For details, see "First Step Guide". 9 Touch [NO] to finish creating a DVD. 60min 0:00:00:00 BURN DVD COMPLETED Create another copy?Disctray opens. 6 Touch [MENU] (EDIT/PLAY) [BURN DVD] . "Click to DVD" starts up and the on-screen instructions appear on your computer. YES NO 7 Place a writable DVD in the disc drive of the computer. The disc tray comes out automatically. To create another DVD with the same content, touch [YES]. [. . . ] 32 Tripod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 TV TYPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 W Warning indicators . . . . . . . . . . . . . [. . . ]