User manual SONY PCM-7030

[. . . ] On certain batteries this symbol might be used in combination with a chemical symbol. The chemical symbols for mercury (Hg) or lead (Pb) are added if the battery contains more than 0. 0005% mercury or 0. 004% lead. By ensuring these batteries are disposed of correctly, you will help prevent potentially negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of the battery. The recycling of the materials will help to conserve natural resources. [. . . ] "Divide All T-MARK(Track Marks)?" is displayed. 8 Press x STOP to exit the menu mode. P Notes · You need a certain amount of free space in the memory to divide a track. For details, see "System Limitations" on page 112. · When you divide a track with a title and artist name, the new track has the same title, and artist name. 68 GB 3 Press > FF/ v or . FR/ V to select "Execute, " and then press N PLAY/ ENTER. "Dividing. . . " appears, and the track is divided at all the track mark positions. The tracks divided from a single track will be suffixed with a sequential number (_1 and so on). z Tip To cancel division during the operation at all the remaining track marks, press x STOP. The tracks that have been divided before the cancellation remain divided. Deleting all tracks in a folder Editing Tracks MENU Track1 A track is divided. Track1_1 Track1_2 Track1_3 N PLAY/ ENTER x STOP > FF/ v, . FR/ V A suffix made up of a sequential number is added each of the divided files. 4 Press x STOP to exit the menu mode. To play a divided track Press > FF/ v or . FR/ V to display the track number, as the divided tracks now each have different track numbers. P Note If the selected folder contains a protected track, you cannot delete the track. 69 GB 1 Select the folder containing the tracks you want to delete when the PCM recorder is in the stop mode. 5 Press > FF/ v or . FR/ V to select "Execute, " and then press N PLAY/ ENTER. The larger the value of sampling frequency, the better the sound quality, but also the larger the amount of data. · Quantifying bit number is a value that represents the amount of data it takes for one second of audio. The larger the value of the bit number, the larger amount of data it takes and the better the sound quality. LCF(Low Cut Filter) Set the LCF(Low Cut Filter) function to cut a low frequency to reduce the roaring noise from wind or noises such as those of air conditioner fans; therefore you can record a track more clearly. 43 76 GB Menu items DPC(Speed Control) Settings (*: Initial setting) Set the DPC(Speed Control) function. You can adjust the playback speed between +100% and ­75% of normal speed in the menu. You can set the speed by 5% for ­ from ­75% to 0%, 10% for + between 0% and 100%. (­30%*) Set the effect you want for the playback in the menu. Bass2: The bass sound is emphasized even more. OFF*: The Effect function does not work. See page 54 Effect 56 About the Menu Function P Notes · When playing back tracks using a built-in speaker, the Effect function does not work. · When "LINE OUT" is selected, the Effect function does not work. Key Control Easy Search Adjust the playback sounds in semitones higher or lower. [. . . ] :A folder for playback only J Recording mode indicator Displays the recording mode set using the menu when the PCM recorder is in the stop mode, and displays the current recording mode when the PCM recorder is in the playback or recording mode. 22/16, 44/16, 44/24, 48/16, 48/ 24, 96/16, 96/24: LPCM file recorded with the PCM recorder 64k, 128k, 320k: MP3 file recorded with the PCM recorder When the files are copied from your computer, file formats only are displayed. :WMA files copied : AAC-LC (m4a) files copied Displays as follows when the PCM recorder cannot get the recording mode. : Unknown 114 GB K File information The file name of the track is displayed. [. . . ]