User manual SONY PMC-MD55

[. . . ] To prevent fire or shock hazard, do not expose the player to rain or moisture. You can use this player on AC power source only. When you use this player for the first time, or when you have not used it for a long time, leave it connected to AC power source for about one hour to charge the built-in backup battery for the clock, timer, preset radio stations, etc. The player will charge the battery automatically as long as it is connected to a power source. [. . . ] If you want to cancel the divide function at this point: Press NO· Note After you stop recording, do not disconnect the mains lead or move the player while "TOC EDIT" is flashing in the display. If you do so, recording may not be done properly. "Complete" appears in the display for a few seconds after the track is divided. The original track only has the track name, while the new track has no name (this happens only when the track you divided had its track name). One track is added to the music calendar. You can combine two adjacent tracks into a single one. Using the combine function, you can combine a number of fragmented recordings or delete the unnecessary track marks. All tracks following the combined track are renumbered. If you repeat editing on the MD, you may not be able to combine the tracks. This is due to the system limitations of the MD (page 72), but not caused by malfunction. If "Cannot Edit" appears in the display, you may be trying to combine the tracks on the first track. You cannot use the combine function on the first track. Track number Combining B and C are combined into one track. Example: To combine tracks B and C, play the track C. If you want to cancel the combine function at this point: Press NO· Note After you stop recording, do not disconnect the mains lead or move the player while "TOC EDIT" is flashing in the display. If you do so, recording may not be done properly. "Complete" appears in the display for a few seconds after the tracks are combined. If both of the combined tracks had track names, the name of the latter track is erased. The total number of tracks in the music calendar decreases by one. After you move the track, the track numbers are renumbered automatically. Note After you stop recording, do not disconnect the mains lead or move the player while "TOC EDIT" is flashing in the display. If you do so, recording may not be done properly. [. . . ] Move closer to the player when using the remote. Operation may become unstable depending on the power supply or other causes because this player employs a microcomputer to link each operation. If other troubles not described above occur, disconnect the mains lead from the wall outlet, then connect it again after about 20 seconds. If the problem still occurs, press the RESET button at the bottom of the player with a pointed object (in this case, clock set, timer or preset radio stations are reset to the initial settings. [. . . ]