User manual SONY RC-100IP

[. . . ] And don't place lighted candles on the apparatus. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. This appliance is classified as a CLASS 1 LASER product. This label is located on the rear exterior. For the customers in the U. S. A. This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. [. . . ] · The program remains even after Program Play ends. When you press H, you can play the same program again. · To check the total number of the programmed tracks, press TIME while the unit is stopped. Notes 2 For DECK A of RCD-W500C, press one of the DISC 1-5 buttons (or DISC SKIP on the remote) to select the desired disc number. 3 Turn AMS (or press . /> on the remote) to select the desired track number, then press AMS (or YES on the remote). To program MP3 files, press ALBUM until ALBUM SELECT indicator in the display lights up, then turn AMS (or press ALBUM +/­ on the remote) to select the desired album title. Press ALBUM until ALBUM SELECT indicator in the display turns off, turn AMS (or press . /> on the remote) to select the desired track number, then press AMS (or YES on the remote). · You cannot create a program containing tracks from both DECK A and DECK B. · "Step Full!" appears in the display when you program over 25 steps. Erase the unnecessary tracks to enter other tracks. · The program is erased when you turn the unit off. · If the total time of the program exceeds 99 minutes 59 seconds, "--. --" appears in the display. · You cannot change the PLAY MODE during playback. · If you program an MP3 track, "--. --" appears in the display. (The total playing time does not appear for MP3 files. ) 19 Recording/Editing Before Recording About recordable discs · A recordable disc is an audio CD-R or Audio CDRW with the following logo. About recording MP3 files · MP3 files are converted to audio CD format before being recorded to the disc. Normal speed SynchroRecording (page 24) Record in normal speed while monitoring the sound. Recording/Editing a ×3 a Same as original Synchro-Recording High-Speed SynchroRecording*2 (Make Disc Off) Record from one disc (or several discs for RCDNormal speed SynchroW500C) in the order you Recording want. You can also record in programmed order. Manual Recording (page 25) Record by selecting or editing the tracks manually. × a × × a × Adjustable with menu operation Adjustable with menu operation Adjustable with REC LEVEL When recording from the component connected to the DIGITAL OPTICAL IN jack Manual Recording (page 25) × a × When recording from the component connected to the ANALOG IN jack Manual Recording (page 25) × a × *1 Set "Make Disc" in the Setup Menu to "On" beforehand (page 35). *2 Even if you select High-Speed Synchro-Recording, the recording speed automatically changes to normal speed in the following cases. ­ When the disc contains Serial Copy Management System information. ­ When the play mode of DECK A is "PGM". ­ When the disc in DECK A contains MP3 files. *3 Be sure to use a blank disc (that has not been recorded). continued 21 Tips · To play the recorded CD on DECK A or another CD player, perform finalization (page 29). · To record your favorite tracks from the CDs in DECK A, make a program (page 19). · If the track marks are not marked properly while making an analog recording from an external component, see page 28. · To record from several discs, see page 25. Notes on recording Synchro-Recording a CD to CD-R or CD-RW You can easily make digital recordings from a CD to a CD-R or CD-RW. [. . . ] Take the disc out and leave the unit turned on for about an hour until the moisture evaporates (page 4). · Press POWER to turn the unit on. · · · · · DECK A (MP3 playback) MP3 files cannot be played back. · You cannot play MP3 files on DECK B. · Recording was not performed according to the ISO 9660 level 1 or level 2 format, or the Joliet or Romeo in the expansion format. · The file extension ". MP3" is not added to the file name. [. . . ]