User manual SONY SAL-55300

[. . . ] Conformity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installation dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Saving energy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . General safety information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] u Remove the protective film from the outside of the appliance. * u Remove all transit supports. If wall spacers are included with the appliance, the specified energy consumption is achieved if these wall spacers are mounted and used. Without wall spacers, the specified appliance depth is reduced by 3. 50 cm. If the enclosed wall spacers are not used, the function of the appliance is not affected in any way. However, on such appliances with less wall clearance, energy consumption will be slightly higher. * 4 Putting into operation u In the case of an appliance with enclosed wall spacers, mount the wall spacers on the back of the appliance at the top left and right. * u Dispose of packaging material (see 4. 5) . u Align the appliance so that it stands firmly and on a level by applying the accompanying spanner to the adjustableheight feet (A) and using a spirit level. * u Follow the sequence of the item numbers in the diagram. If the appliance is installed in a very damp environment, condensate may form on the outside of the appliance. u Always see to good ventilation at the installation site. Fig. 4 On appliances with a door handle 4. 4 Insertion into a row of kitchen units 4. 3 Changing over the door hinge You can change over the door hinges if necessary. q Torx® 25 q Torx® 15 q Supplied open-ended wrench q If necessary, a second person to assist with installation CAUTION Risk of injury if the door tips!w The Menu symbol is shown on the display, Fig. u Briefly confirm with the SuperFrost button, Fig. The temperature display and the alarm symbol Fig. The audible alarm is automatically silenced, the alarm symbol Fig. 3 (6) goes out and the temperature display stops flashing when the temperature is sufficiently cold again. If the alarm status persists: (see Malfunction). 5 Control 5. 1 Brightness of the temperature display You can adjust the brightness of the temperature display to the light conditions of the room in which the appliance is installed. 5. 1. 1 Setting the brightness The brightness is adjustable between h 0 (minimum brightness) and h 5 (maximum brightness). u Activate setting mode by pressing the SuperFrost button, Fig. w The Menu symbol is shown on the display, Fig. 3 (7). 5. 3. 1 Muting the temperature alarm The audible alarm can be muted. When the temperature is sufficiently cold again, the alarm function is active again. w The audible alarm is silenced. 6 Control 5. 4 Freezing food The rating plate indicates the maximum quantity of fresh food you can freeze within 24 hours (see Appliance at a glance) under "Freezing capacity . . . The maximum load of frozen food for the drawers is 25 kg each and for the shelves 35 kg each. Wrap produce and spread it out as far as possible. [. . . ] The power plug is not properly inserted in the wall socket. The fuse of the wall socket is not in order. Although the running time is increased as a result, energy is saved. u This is normal in energy-saving models. [. . . ]