User manual SONY SAL70200G2

[. . . ] ???MF????MF?????? ??????? Notes on use ??When Slide the focus-mode switch to the appropriate mode, AF or MF (1). To the camera manuals to set the focus mode of the camera. MF, turn the focusing ring to adjust the focus (2) while looking through the viewfinder, etc. [. . . ] To reduce this phenomena (called vignetting), close the aperture by 1 to 2 stops. ) Rotate the focusing ring to set correct DMF when the focus is locked in AF-A (automatic auto focus) or AF-S (single-shot auto focus). Using this mode is recommended for normal subjects. ???????????? is not available in AF-C (continuous auto focus), when out of focus, or with continuous advance in AF-A after the second focus is confirmed. Full-time DMF (F TIME) In any AF mode (AF-A/S/C), rotate the focusing ring while pressing the shutter button halfway to set correct DMF. This is useful to catch a fastmoving subject. Attaching/detaching the lens To attach the lens (See illustration ???. Always confirm the image sharpness through the viewfinder, etc. , especially when the lens is focused near infinity. 1 2 Remove the rear and front lens caps and the camera body cap. You ??2 Printed in Japan ????????????????????????? can attach/detach the lens front cap in two ways, (1) and (2). When you attach/detach the lens cap with the lens hood attached, use method (2). AF-A/S/C? Align the orange dot on the lens barrel (mounting index) with the orange dot on the camera (mounting index), then insert the lens into the camera mount and rotate it clockwise until it locks. The focus is fixed and you can release the shutter on the fixed focus. Release the focus-hold button while pressing the shutter button halfway to start AF again. ??????????? not press the lens release button on the camera when mounting the lens. to remove the lens (See illustration ???. ) While pressing and holding the lens release button on the camera, rotate the lens counterclockwise until it stops, then detach the lens. Function of the focus-hold button can be changed on cameras with custom function capability. Refer to the camera manuals for details. Switching focus range (AF range) The focus-range limiter enables you to reduce the auto focusing time. [. . . ] (3) (4) 1 2 3 4 Remove the lens from the camera. Rotate the tripod-mounting collar to align the red line on the tripod-mounting collar (collar mounting index next to SET/ RELEASE) with the orange dot on the lens (mounting index) (3). Move the tripod-mounting collar towards the lens mount and detach the tripod-mounting collar from the lens (4). ????m?/Depth-of-field table (in meters)/Tableau de profondeur de champ (en mtres)/Tabla de profundidad de campo (en metros)/ ???70??????105??????200??/Upper row: 70 mm, middle row: 105 mm, lower row: 200 mm/Ligne du haut : 70 mm, ligne du milieu : 105?mm, ligne du bas : 200 mm/Fila superior: 70 mm, fila del medio: 105 mm, fila inferior: 200 mm/ 1 2 3 4 ??????????????? ? [. . . ]