User manual SONY SCD-777ES

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. ­ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Before operating the unit, please read this manual thoroughly and retain it for future reference. You are cautioned that any changes or modification not expressly approved in this manual could void your authority to operate this equipment. [. . . ] 5 Number buttons (15) Press to enter the track numbers. 8 m/M buttons (16) Press to locate a portion you want to play within a track. Buttons (16) Press to locate a specific point marked with an index signal when you play a disc that has index signals. 0 FILTER button (19) Press to select the digital filter type when a CD is played. Qa SACD/CD button (12) Each time you press the button, the SACD or CD indicator on the front of the player lights. This chapter explains the various ways to play discs. Select the player position using the input selector on the amplifier. If you do not, "No Stabilizer" appears in the display . With felt side facing down Each time you pr ess the button, the SACD or CD indicatorlights. When the disc lid is closed, "CLOSE, " "Loading, " and "TOC Reading" appear in sequence in the display . Then, playback star ts fr om the first track. If you want to star t playing fr om a specific track, pr ess l/ L repeatedlytoselectthetracknumberbefor epr essing H. Stop play Pause play Resume play after pausing Locate a succeeding track Locate the beginning of the current track or a preceding track Eject the disc Z If you turn on the player when a disc is already loaded playback starts automatically. If you connect a commercially available timer, you can set it to start playing the disc at any time you want. Z To select a layer you want to listen to when playing a hybrid disc (page 7) After you stop play using x, press SACD/CD repeatedly to light either the SACD or CD indicator. The Super Audio CD player takes longer than a conventional CD player to start playing after the disc is loaded. Displaying information while the player is stopped press TIME. The display shows the total number of tracks and total playing time on the disc. Total number of tracks Total playing time Displaying information while the player is playing Playing track number and elapsed playing time of the current track (default display) This player can display the disc name, ar tist name, and cur rent track name as TEXT information. Ticular point in a track during play or This function can be used with Shuf fle Play to r epeat all the tracks in random or der (page 17), or with Pr ogramme Play to r epeat all the tracks in a pr ogramme (page 18). You can also r epeat a specific track or por tion within a track. Locating a point while monitoring the sound (Search) Tracks that are only a few seconds long may be too short for monitoring. [. . . ] You may also hear the mechanical sound from the player when you insert a warped disc. The use of any other stabilizer may damage the player. Clean the cabinet, panel, and controls with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder, or solvent such as alcohol or benzine. [. . . ]