User manual SONY STR-DE685 annexe 1

[. . . ] 4-238-380-12(1) FM Stereo FM-AM Receiver Operating Instructions Owner's Record The model and serial numbers are located on the rear panel. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. STR-DE685 Serial No. GB STR-DE685 © 2002 Sony Corporation WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To prevent fire, do not cover the ventilation of the apparatus with newspapers, table-cloths, curtains, etc. [. . . ] XXX dB) Lets you adjust the level of the surround right speaker. Sub woofer level (S. W. XXX dB) Lets you adjust the level of the sub woofer. Dynamic range compression is possible with Dolby Digital sources only. 30GB Adjusting the equalizer The EQ menu lets you adjust the equalization of the front speakers. The settings are stored individually for each sound field. Resetting customized sound fields to the factory settings 1 If the power is on, press ?/1 to turn off the power. 1 Start playing a program source encoded with multi channel surround sound. 2 Hold down MODE and press ?/1. "SF. CLR. " appears in the display and all sound fields are reset at once. 2 Press EQ. The button lights up and the first parameter is displayed. 3 Press or to select the parameter (gain (dB)) you want to adjust. you want. Enjoying Surround Sound 4 Turn the jog dial to select the setting The setting is entered automatically. Gain (dB) To turn on/off the equalizer Press EQUALIZER. The EQ indicator in the display lights up when the equalizer is turned on. When you adjust the equalizer using the EQ parameters, the settings are stored separately for each sound field and can be reproduced whenever you turn on the equalizer. Front speaker bass adjustment (Gain) Lets you adjust the gain of bass. Front speaker treble adjustment (Gain) Lets you adjust the gain of treble. 31GB Receiving Broadcasts Notes Before receiving broadcasts, make sure you have connected FM and AM antennas to the receiver (page 7). Storing FM stations automatically (AUTOBETICAL) (Models of area code CEL, CEK only) · Do not press any button on the receiver or supplied remote during autobetical operation. · If you move to another area, repeat this procedure to store stations in your new area. · For details on tuning the stored stations, see page 34. · If you move the antenna after storing stations with this procedure, the stored settings may no longer be valid. If this happens, repeat this procedure to store the stations again. Direct tuning You can enter a frequency of the station you want directly by using the numeric buttons on the supplied remote. For details on the buttons used in this section, see pages 42­48 for remote RM-PP411 and pages 49­52 for remote RM-U305C. This function lets you store up to 30 FM and FM RDS stations in alphabetical order without redundancy. Additionally, it only stores the stations with the clearest signals. If you want to store FM or AM stations one by one, see "Presetting radio stations" on page 34. 1 Press ?/1 to turn off the receiver. 2 Hold down MEMORY and press ?/1 to turn the receiver back on. 1 Press TUNER on the remote. The last received station is tuned in. "AUTO-BETICAL SELECT" appears in the display and the receiver scans and stores all the FM and FM RDS stations in the broadcast area. For RDS stations, the tuner first checks for stations broadcasting the same program, then stores only the one with the clearest signal. The selected RDS stations are sorted alphabetically by their Program Service name, then assigned a 2-character preset code. Regular FM stations are assigned 2-character preset codes and stored after the RDS station. When done, "FINISH" appears in the display momentarily and the receiver returns to the normal operation. 2 Press FM* or AM* to select the FM or AM band. 3 Press D. 4 Press the numeric buttons to enter the frequency. Example 1: FM 102. 50 MHz 1 b0b2b5b0 Example 2: AM 1350 kHz (You don't have to enter the last "0" when the tuning scale is set to 10 kHz. ) 1 b3b5b0 If you cannot tune in a station and the entered numbers flash Make sure you've entered the right frequency. If the entered numbers still flash, the frequency is not used in your area. * For models of area code CEL, CEK: FM/AM. 32GB 5 If you've tuned in an AM station, adjust the direction of the AM loop antenna for optimum reception. Automatic tuning If you don't know the frequency of the station you want, you can let the receiver scan all available stations in your area. 6 Repeat steps 2 to 5 to receive another station. Tips · If you do not remember the precise frequency, press TUNING + or TUNING ­ after entering the value close to the frequency you want. The receiver automatically tunes in the station you want. [. . . ] 2) Measured under the following conditions: 10 Hz ­ 70 kHz +0. 5/­2 dB (with sound field, equalizer, and bass boost bypassed) Sensitivity: 250 mV Impedance: 50 kilohms S/N3): 96 dB (A, 250 mV4)) 3) INPUT SHORT (with sound field, equalizer and bass boost bypassed). Inputs (Digital) DVD/LD (Coaxial) Sensitivity: ­ Impedance: 75 ohms S/N: 100 dB (A, 20 kHz LPF) Sensitivity: ­ Impedance: ­ S/N: 100 dB (A, 20 kHz LPF) VIDEO 2, CD/SACD, MD/TAPE (Optical) Outputs (Analog) MD/TAPE (OUT), Voltage: 250 mV VIDEO 1 (AUDIO OUT) Impedance: 10 kilohms SUB WOOFER Voltage: 2 V Impedance: 1 kilohms Outputs (Digital) MD/TAPE (Optical) EQ Gain levels: Sensitivity: ­ ±6 dB, 1 dB step 56GB FM tuner section Tuning range Antenna terminals 87. 5 - 108. 0 MHz 75 ohms, unbalanced Intermediate frequency 10. 7 MHz Sensitivity Mono: Stereo: Usable sensitivity S/N Mono: Stereo: 18. 3 dBf, 2. 2 µV/75 ohms 38. 3 dBf, 22. 5 µV/75 ohms 11. 2 dBf, 1 µV/75 ohms 76 dB 70 dB 5) You can change the AM tuning scale to 9 kHz or 10 kHz. After tuning in any AM station, turn off the receiver. Hold down PRESET TUNING + and press ?/1. [. . . ]