User manual SONY SVE15138CXW VAIO® USWER GUIDE (PRINTABLE)

[. . . ] Com Register your product for better service: www. Com/productregistration Buy Accessories, Consumables and Original spare parts for your appliance: www. Com/shop CUSTOMER CARE AND SERVICE We recommend the use of original spare parts. When contacting Service, ensure that you have the following data available. [. . . ] The set temperature will be reached within 24 hours. After a power failure the set temperature remains stored. 5 EcoMode For optimal food storage select the EcoMode . Press the Mode button until the corresponding icon appears. The temperature indicator shows the set temperature: – for the freezer: -18°C The EcoMode indicator is shown. Press the Mode button in order to select an other function or press the Mode button until you can see none of the special icons. Com ing the Temperature colder button and the Temperature warmer button. 8 High temperature alarm Temperature increase in the freezer compartment (for example due to an earlier power failure or door is open) is indicated by: • flashing the alarm and freezer temperature indicators • sounding of buzzer. The freezer temperature indicator shows the highest temperature reached for a few seconds. The alarm indicator continue to flash until the normal conditions are restored. 9 Door open alarm An acoustic alarm will sound if the door is left open for a few minutes. 1 Hints for freezing To help you make the most of the freezing process, here are some important hints: • the maximum quantity of food which can be frozen in 24 hrs. Is shown on the rating plate; • the freezing process takes 24 hours. Defrosting can be accelerated by placing bowls with hot water (not boiling) inside the freezer. €¢ Loosen the drainage channel from its resting position, push it in according to the illustration and collect a water container. 1 Periodic cleaning The equipment has to be cleaned regularly: • clean the inside and accessories with lukewarm water and some neutral soap. €¢ regularly check the door seals and wipe clean to ensure they are clean and free from debris. • rinse and dry thoroughly. Do not pull, move or damage any pipes and/or cables inside the cabinet. Never use detergents, abrasive powders, highly perfumed cleaning products or wax polishes to clean the interior as this will damage the surface and leave a strong odor. Clean the condenser (black grill) and the compressor at the back of the appliance with a brush. This operation will improve the performance of the appliance and save energy consumption. [. . . ] • Remove the ventilation grille. Remove the upper filling and install it on the opposite side of the grille. €¢ Remove the pedal hole cover and install the cover provided in the accessory bag on the opposite side. €¢ Lay down the appliance back side down on a wooden support. [. . . ]