User manual SONY SVS1313BGXB

[. . . ] ●● Scroll ▲, ▼ to view information for other channels. ▶ English ❑❑ Memorizing channels ■■ Aerial OO MENUm → Broadcasting → Aerial → ENTERE Before your television can begin memorising the available channels, you must specify the type of signal source that is connected to the TV. ◀ ▶ English ■■ Auto Tuning (depending on the country) OO MENUm → Broadcasting → Auto Tuning → ENTERE NN Automatically allocated programme numbers may not correspond to actual ●● Auto Tuning Aerial (Air / Cable): Select the aerial source to memorise. If a channel is locked, the PIN input window appears. ◀ NN When selecting Air, scans for a channel automatically and stores in the TV. Channel Type (Digital & Analogue / Digital / Analogue): Select the channel source to memorise. ▶ English When selecting Cable → Digital & Analogue, Digital or Analogue –– Operator Selection (depending on the country): Selects a provider of cable services. –– Search Mode: Scans for all channels with active broadcast stations and stores them in the TV. NN If you select Quick, you can set up the Network, Network ID, ◀ Frequency, Modulation and Symbol Rate manually by pressing the button on the remote control. –– Network: Selects the Network ID setting mode among Auto or Manual. ●● Network ID: When Network is Manual, you can set up Network ID using the numeric buttons. ▶ English country). [. . . ] It is useful at night. NN To use the volume control on the source device connected to the TV, set Auto Volume to Off on the TV. Otherwise, a change to the volume control of the source device may not be applied. ◀ ▶ English ■■ Additional Settings OO MENUm → Sound → Additional Settings → ENTERE ●● DTV Audio Level (digital channels only): This function allows you to reduce the disparity of a voice signal (which is one of the signals received during a digital TV broadcast) to a desired level. NN According to the type of broadcast signal, MPEG / HE-AAC can be adjusted between -10dB and 0dB. NN To increase or decrease the volume, adjust between the range 0 and -10 respectively. ◀ ▶ English ●● Digital Audio Out: Digital Audio out is used to provide digital sound, reducing interference going to speakers and various digital devices such as a DVD player. Audio Format: You can select the Digital Audio output format. The available Digital Audio output format may differ depending on the input source. NN By connecting to 5. 1ch speakers in a Dolby Digital setup, maximize your ◀ interactive 3D sound experience. Audio Delay: Correct audio-video sync problems, when watching TV or video, and when listening to digital audio output using an external device such as an AV receiver (0ms ~ 250ms). ▶ English ●● Dolby Digital Comp: This function minimizes signal disparity between a dolby digital signal and a voice signal (i. e. NN Select Line to obtain dynamic sound, and RF to reduce the difference between loud and soft sounds at night time. Line: Set the output level for signals greater or less than -31dB (reference) to either -20dB or -31dB. RF: Set the output level for signals greater or less than -20dB (reference) to either -10dB or -20dB. ◀ ■■ Reset Sound OO MENUm → Sound → Reset Sound → ENTERE Reset all sound settings to the factory defaults. ▶ English ❑❑ Selecting the Sound Mode t When you set to Dual I-II, the current sound mode is displayed on the screen. Audio Type A2 Stereo Mono Stereo Dual NICAM Stereo Mono Stereo Dual Dual I-II Mono Stereo ↔ Mono Dual I ↔ Dual II Mono Mono ↔ Stereo Mono → Dual I  Dual II  Dual I Dual I Automatic change Default Automatic change ◀ to the mono. ▶ NN If the stereo signal is weak and an automatic switching, occurs, then switch NN Only activated in stereo sound signal. (Off Timer 1, Off Timer 2, Off Timer 3) Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual to set at your convenience. If you select Manual, you can set up the day you want to activate the timer. ◀ NN The c mark indicates the day you’ve selected. Time: Set the hour and minute. ▶ English ❑❑ Economical Solutions ■■ Eco Solution OO MENUm → System → Eco Solution → ENTERE ●● Energy Saving: This adjusts the brightness of the TV in order to reduce power consumption. ●● Eco Sensor for LED 5 series : To enhance your power savings; the picture settings will automatically adapt to the light in the room. NN If you adjust the Backlight, the Eco Sensor will be set to Off. ◀ Min. Backlight: When Eco Sensor is On, the minimum screen brightness can be adjusted manually. ▶ NN If Eco Sensor is On, the display brightness may change (become slightly darker or brighter) depending on the surrounding light intensity. English ●● No Signal Power Off: To avoid unnecessary energy consumption, set how long you want the TV to remain on if it’s not receiving a signal. NN Disabled when the PC is in power saving mode. ●● Auto Power Off: The TV will be automatically turned off when no user operation is received for 4 hours. NN If the Auto Power Off option is set to Off, the TV will stay on even if no operations are performed on the TV. ◀ ▶ English ❑❑ Other Features ■■ Menu Language OO MENUm → System → Menu Language → ENTERE Set the menu language. ■■ Auto Protection Time OO MENUm → System → Auto Protection Time → ENTERE ◀ ●● If the screen remains idle with a still image for a certain period of time defined ▶ by the user, the screen saver is activated to prevent the formation of ghost images on the screen. English ■■ General OO MENUm → System → General → ENTERE ●● Game Mode: When connecting to a game console such as PlayStation™ or Xbox™, you can enjoy a more realistic gaming experience by selecting game mode. NN NOTE ●● Precautions and limitations for game mode –– To disconnect the game console and connect another external device, set Game Mode to Off in the setup menu. slightly. ◀ –– If you display the TV menu in Game Mode, the screen shakes ●● Game Mode is not available in TV mode. ●● After connecting the game console, set Game Mode to On. Unfortunately, you may notice reduced picture quality. ▶ English ●● If Game Mode is On: –– Picture Mode is set to Standard and Sound Mode is set to Movie. ●● Panel Lock: Lock or unlock all the keys on the panel. ●● Boot Logo: Display Samsung logo when the TV is turned on. ■■ Change PIN OO MENUm → System → Change PIN → ENTERE ◀ Change your password required to set up the TV. NN The PIN input screen appears before the setup screen. [. . . ] If your network requires a Static IP address, you must enter the IP address, subnet mask, gateway, and DNS values manually on your TV’s Cable Setup Screen when you set up the network connection. To get the IP address, subnet mask, gateway, and DNS values, contact your Internet Service Provider (ISP). If you have a Windows computer, you can also get these values through your ▶ computer. NN You can use ADSL modems that support DHCP if your network requires a Static IP address. [. . . ]