User manual SONY VAIO VGN-FW550F

[. . . ] To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. Certain countries may regulate disposal of the battery used to power this product. Two ways of connecting to a sound source . 21 To start/stop recording in sync with the source player (Synchro-recording) . [. . . ] If you want to check the remaining time or the recording position while recording or in stop mode, see page 30. The AVLS (Automatic Volume Limiter System) function keeps down the maximum volume to protect your ears. Press MENU (EDIT for 2 seconds or more), press <SELECT, (flip the lever towards > or . ) repeatedly until "AVLS" flashes in the display, and then press ENTER (ENTER). press <SELECT , (flip the lever towards > or . ) repeatedly until "AVLS ON" flashes in the display, and then press ENTER (ENTER). When you try to turn the volume too high, "AVLS" flashes in the display. To prevent the buttons from being accidentally operated when you carry the recorder, use this function. Connect the i jack of the recorder to the LINE IN jacks of an amplifier or a tape recorder with a line cable (not supplied). When the recorder is connected to an another audio component through the supplied remote control. When connecting a line cable (not supplied) to the headphones/ earphones jack of the remote control, be sure to set the "BEEP" setting to "BEEP OFF. You can quickly erase all the tracks and data of the MD at the same time. Note that once a recording has been erased, you cannot retrieve it. Be sure to check the contents of the disc you want to erase. While the recorder is stopped, press MENU (EDIT for 2 seconds or more). press <SELECT , (flip the lever towards > or . ) repeatedly until "EDIT" flashes in the display, and then press ENTER (ENTER). ) repeatedly until " : Erase" flashes in the display, and then press ENTER (ENTER). When erasing is complete, "BLANKDISC" appears in the display. You can add track marks so that the part after the new track mark is counted as a new track. While playing or pausing an MD, press T MARK on the recorder at the point you want to mark. To add track marks while recording Press T MARK on the recorder at the point you want to add a track mark. [. . . ] You tried to play or record with no disc in the recorder. You tried to record or edit on a premastered MD (P/B stands for "playback"). You tried to record or edit on a MD with the tab in the recordprotect position. You tried to erase the track mark at the beginning of the first track. [. . . ]