User manual SONY VAIO VGN-NS150J

[. . . ] Kytke television virtajohto ja paina television 1 -kytkintä. Bilden från den anslutna apparaten visas till vänster och TV-programmet till höger. Genom att ansluta en inspelningsapparat till / / AV2-uttaget går det att spela in signalen som matas ut från andra komponenter som är anslutna till TV:n. Upp till 11 kompatibla komponenter går att ansluta sammanlagt, med upp till 5 komponenter per uttag. [. . . ] Be sure to use only an authorized HDMI cable bearing the HDMI logo. We recommend that you use a Sony HDMI cable (high speed type). When connecting an audio system that is compatible with control for HDMI, be sure to also connect it to the DIGITAL AUDIO (PCM) OUT (OPTICAL) socket. 5 / PC IN PC It is recommended to use a PC cable with ferrites like the "Connector, D-sub 15" (ref. You can listen to TV sound on the connected Hi-Fi audio equipment. To use the CAM, remove the "dummy" card from the CAM slot, then turn off the TV and insert your CAM card into the slot. When you are not using the CAM, we recommend that you keep the "dummy" card in the CAM slot. CAM is not supported in some countries/areas. You can listen to TV sound through headphones. Turn on the connected equipment, and perform one of the following operations. For equipment connected to the scart sockets using a fully-wired 21-pin scart lead To return to single picture mode The picture framed in green is audible. ­ TOOLS to display "Device Control", then select options from "Menu", "Options", and "Content List" to operate the equipment. The control for HDMI settings must be set on both the TV side and connected equipment side. To connect the equipment that is compatible with control for HDMI Connect the compatible equipment and the TV with an HDMI cable. When connecting an audio system, be sure to also connect the DIGITAL AUDIO (PCM) OUT (OPTICAL) socket of the TV and the audio system using an optical audio cable (except for KDL40S40xx/40U40xx/40L4000). Menu functions allow you to enjoy various convenient features of this TV. You can easily select channels or input sources, and change the settings for your TV. Displays the "Settings" menu where most of the advanced settings and adjustments are performed. Unavailable options are greyed out or not displayed. Using Menu Functions * This function may not be available in some countries/areas. To view pictures from an external input, select the input source, then press . Picture Mode Sets a picture mode when displaying an input other than a PC. [. . . ] When "Quick Start" is activated, standby power consumption will remain at 16 W for two hours after switching to standby mode. Design and specifications are subject to change without notice. This TV's PC input does not support Sync on Green or Composite Sync. This TV's PC input does not support interlaced signals. [. . . ]