User manual SONY VAIO VPCB11JGX/B

[. . . ] Pressing the Enter key again will select the highlighted choice. Device control feature parameters, such as changing I/O addresses and boot devices. System Data Security feature parameters, such as passwords. Entering the BIOS Setup Utility To enter the BIOS Setup Utility do the following: 1. Press the [F2] key when a message appears under the Fujitsu logo prompting you to "Press <F2>: BIOS Setup". This will open the main menu of the BIOS Setup Utility with the current settings displayed. [. . . ] If you wish to exit from the setup utility, press the [Esc] key or use the cursor keys to go to the Exit menu or to move to another menu. 9 LifeBook T Series Tablet PC ADVANCED MENU ­ SETTING DEVICE FEATURE CONTROLS The Advanced Menu allows you to: Set the I/O addresses for the infrared ports. Set the features of the keyboard/mouse. Select between the display panel and/or an external CRT display. Set internal device configurations Configure USB features. Configure miscellaneous features such as Wake Up On LAN. Follow the instructions for Navigating Through the Setup Utility to make any changes. If any two ports or devices have the same I/O address assigned your tablet will not function normally. Please keep a record of original settings before making any changes in the event that a restoration is required. See your hardware and software documentation as well as the setup utility to determine settings, limitations, etc. PhoenixBIOS Setup Utility Advanced IrDA Port Configurations Infrared Port: Mode: I/O Address: Interrupt: I/O Address: DMA Channel: [Enabled] [FIR] [2E8-2EF] [IRQ 6] [400-43F] [DMA 3] Item Specific Help [Disabled] The port is disabled. [Enabled] The port is enabled with user configuration. [Auto] Plug & Play OS configure the port. F1 Help ESC Exit Select Item Select Menu -/Space Change Values Enter Select Sub-Menu F9 Setup Defaults F10 Save and Exit Figure 5. Miscellaneous Configurations Submenu Table 11: Fields, Options and Defaults for the Miscellaneous Configurations Submenu Menu Field Power Button: Options Default [DIsabled] Description When Disabled is selected, the power button does not respond to a press. When Power Off is selected, the button turns the power off. When Enabled is selected, the system will wake up when the internal LAN device receives a Magic Packet while the system is powered off. Turns the Auto Save To Disk feature on and off. When turned on, when low battery state is reached, the system in suspend state will save its state to disk and power off. Allows you to set or disable the system volume level. Disabled Power Off Disabled Enabled Off On Wake up on LAN: [Disabled] Auto Save To Disk: [Off] Volume Setting: Off Minimum Middle Maximum [Middle] 19 LifeBook T Series Tablet PC Event Logging Submenu of the Advanced Menu The Event Logging Submenu configures event logging features for DMI events. PhoenixBIOS Setup Utility Security Power Savings Exit Item Specific Help Main Advanced Event Logging Event Log Capacity: Event Log Validity: View Event Log: Event Logging: System Boot Event: Clear All Event Logs: Mark Events as Read: Space Available Valid [Enter] [Enabled] [Disabled] [No] [Enter] Press <Enter> key to view the contents of the event log. F1 Help ESC Exit Select Item Select Menu -/Space Change Values Enter Select Sub-Menu F9 Setup Defaults F10 Save and Exit Figure 12. Event Logging Submenu Table 12: Fields, Options and Defaults for the Event Logging Submenu of the Advanced Menu Menu Field Event Log Capacity: Event Log Validity: View Event Log: Event Logging: Options Default Space Available Description Display only. Valid Enter Disabled Enabled Disabled Enabled No Yes Enter [Enter] [Enabled] Display only. Allows you to view content of event log. Turns event logging on and off for all DMI events. System Boot Event: Clear All Event Logs: Mark Events as Read: [Disabled] Turns event logging on and off for DMI system boot events. [No] When set to [Yes] all event logs will be cleared at next boot. [Enter] Allows you to make all events currently in the event log as read. 20 Security Menu SECURITY MENU ­ SETTING THE SECURITY FEATURES The Security menu allows you to set up the data security features of your tablet to fit your operating needs and to view the current data security configuration. Follow the instructions for Navigating Through the Setup Utility to make any changes. (See Navigating through the Setup Utility on page 2 for more information) Entering a password incorrectly three times in a row will cause the keyboard and mouse to be locked out and the warning [System Disabled] to be displayed. [. . . ] <Shift+1> enables or disables a device. <+>/<Space> or <-> moves the device up or down. <d> removes a device that is not installed. F1 Help ESC Exit Select Item Select Menu -/Space Change Values Enter Select Sub-Menu F9 Setup Defaults F10 Save and Exit Figure 18. Boot Device Priority Submenu Table 18: Fields, Options and Defaults for the Boot Device Priority Submenu of the Boot Menu Menu Field +Floppy Disk Drive +Hard Disk Drive CD-ROM Drive Description The boot selections determine the order in which the BIOS searches for the operating system during a startup sequence. [. . . ]