User manual SONY VAIO VPC-CW15FX/W

[. . . ] AMD, AthlonTM, AthlonTM XP, ThoroughbredTM, and DuronTM are registered trademarks of AMD Corporation. Intel® and Pentium® are registered trademarks of Intel Corporation. PS/2 and OS ® /2 are registered trademarks of International Business Machines Corporation. W indows ® 2000/NT/XP/Vista are registered trademarks of Microsoft Corporation. [. . . ] The computer is communicating with anothercomputer on the LAN. 1000 Mbit/sec data rate is selected. Left Orange On (steady state) On (brighter & pulsing) Green Right Orange Off On On En-19 English M S-7380 M ainboard H USB Port The USB (Universal Serial Bus) port is for attaching USB devices such as keyboard, mouse, or other USB-com patible devices. Audio Port Connectors These audio connectors are used for audio devices. You can differentiate the color of the audio jacks for different audio sound effects. I Line-Out (Green) - Line Out, is a connector for speakers or headphones. J Line-In (Blue) - Line In, is used for external CD player, tape player or other audio devices. K MIC (Pink) - Mic In, is a connector for microphones. L CS-Out (Orange) - Center/ Subwoofer Out in 5. 1/ 7. 1 channel m ode. M RS-Out (Black) - Rear-Surround Out in 4/ 5. 1/ 7. 1 channel m ode. N SS-Out (Gray) - Side-Surround Out 7. 1 channel m ode. O Coaxial S/PDIF-out This S/PDIF (Sony & Philips Digital Interconnect Form at) connector is provided for digital audio transm ission to external speakers through a coaxial cable. P Optical S/PDIF-out This S/PDIF (Sony & Philips Digital Interconnect Form at) connector is provided for digital audio transm ission to external speakers through an optical fiber cable. Q External SATA Port This ESATA (External Serial ATA) port is used to connect the external SATA device. You can also use the optional external SATA cable to connect SATA device and ESATA port. En-20 BIOS Setup This chapter provides basic information on the BIOS Setup program and allows you to configure the system for optimum use. You may need to run the Setup program when: * An error message appears on the screen during the system booting up, and requests you to run BIOS SETUP. * You want to change the default settings for customized features. English Important 1. The items under each BIOS category described in this chapter are under continuous update for better system performance. Therefore, the description may be slightly different from the latest BIOS and should be held for reference only. Use arrow keys to select among the items and press <Enter> to accept or enter the sub-menu. English Standard CMOS Features Use this menu for basic system configurations, such as time, date etc. Advanced BIOS Features Use this menu to setup the item s of special enhanced features. Integrated Peripherals Use this menu to specify your settings for integrated peripherals. Power Management Setup Use this menu to specify your settings for power management. H/W Monitor This entry shows your PC health status. BIOS Setting Password Use this menu to set the Password. Cell Menu Use this menu to specify your settings for frequency/voltage control and overclocking. USER SETTINGS Use this menu to save/ load your settings to/ from CMOS for BIOS. Load Fail-Safe Defaults Use this menu to load the default values set by the BIOS vendor for stable system perform ance. Load Optimized Defaults Use this menu to load the default values set by the mainboard manufacturer specifically for optim al perform ance of the m ai nboard. Save & Exit Setup Save changes to CMOS and exit setup. [. . . ] Setup Date/ Tim e : [Standard CMOS Features]<Enter> Standard CMOS Features/ 3. Save & Exit Setup : Save & Exit Setup <Enter> <Ok><Enter>BIOS BIOS Jp-24 /CDOS / CD Driver menu - Utility menu - W ebSite menu- SONYBIOS Jp-25 This page is intentionally left blank. viii P7N SLI Tc-1 MS-7380 - LGA 775 Intel® CoreTM2 Extreme, CoreTM2 Quad, CoreTM2 Duo/ Pentium Dual-Core Celeron - Intel® EIST - Intel® Hyper-Threading (HT) ( CPU: http://global. msi. com. tw/index. php?func=cpuform) FSB - 1333/ 1066/ 800/ 533 MHz - NVIDIA® nForce 750i SLI (C72P) - NVIDIA® nForce 430i (MCP51) - DDR2 533/ 667/ 800 SDRAM (240 pin/ 1. 8V) - 4 DDR2 DIMM ( 8GB ) (: http://global. msi. com. tw/index. php?func=testreport ) LAN - Realtek® RTL8211BL 10/100/1000 IEEE 1394() - VIA® VT6308P - 400 Mb - Realtek® ALC888 - 7. 1 - Azalia 1. 0 IDE - NVIDIA® nForce 430i 2 IDE - Ultra DMA 66/100/133 PIO, - 4 IDE SATA - NVIDIA® nForce 430i 4 SATA II - 3 Gb Tc-2 RAID - 4 SATA RAID 0/ 1/ 0+1/ 5/ JBOD - 1 - 1 360KB720KB1. 2MB1. 44MB 2. 88MB - 1 PS/2 - 1 PS/2 - 1 IEEE 1394 () - 1 S/PDIF-out - 1 CMOS - 4 USB 2. 0 - 1 LAN - 6 - 1 - 2 USB 2. 0 - 1 IEEE 1394 () - 1 S/PDIF-out - 1 CD-in - 1 - 1 TPM () - 1 COM () - 3 PCI Express x16 a. PCI Express x16 (PCI_E1) PCI Express 2. 0 x16 b. 2 PCI Express x16 PCI Express 2. 0 x8 c. [. . . ]