User manual SONY VPCEG25FX/B

[. . . ] 7 About MTX Editor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Using the PDF manual. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Controls and Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Front Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] • OS: Windows7 Home Premium or higher • Recommended specifications: CPU : Core i3/5 or better Memory : 4GB or more HDD : 50 MB or more free space Input patching Input channel settings (e. g. , gain, HPF, EQ) Matrix 2. Install MTX Editor in your computer. For details on installation, refer to “MTX Setup Manual. ” Matrix/zone settings 3. Specify the IP address and subnet mask of your computer. Enter “192. 168. 0. 253” as the IP address and “255. 255. 255. 0” as the subnet mask. Router 4. If you want to play back music or other audio files from the VPCEG25FX/B itself, prepare an SD memory card. Copy the audio files to your SD memory card. For details on SD memory card handling, refer to “Using the VPCEG25FX/B to play audio files saved on an SD memory card” (page 18). Output channel settings (e. g. , output level, delay/ room EQ, speaker processor) Output patching Output port settings (e. g. , polarity, output gain) 5. Start up MTX Editor. For details on installing and using MTX Editor, refer to “MTX Setup Manual” and “MTX Editor User’s Manual. ” As necessary, make input patching and output patching settings to specify the audio signal flow of the devices connected to the VPCEG25FX/B’s [INPUT] /[ST IN]/[OUTPUT]/ [YDIF] connectors. Make settings for the necessary components while offline. • HA section: HA gain, +48V (phantom power) • Input channel section: HPF, 3BAND EQ, GATE, COMP, FBS, AGC, Level • Matrix/Zone section: Two-level priority ducker, ANC • Output channel section: Room EQ (Delay, 4Band EQ), SPEAKER PROCESSOR (X-over, Delay, 6Band EQ, Level, Limiter) 6. Set up the entire MTX system as directed by the wizard. Make settings such as the number of connected MTX/XMV/ DCP devices, and the UNIT ID and YDIF mode (Cascade mode or Distribution mode) for each device. For details on YDIF, refer to “Features” (page 7), and “o [YDIF] connectors” in “Controls and Connectors” (page 10). Print out the schematic diagram shown at the end of the wizard, and use it when you make the actual connections and settings. VPCEG25FX/B Owner’s Manual 13 Quick Guide 8. Recall, edit, and save other presets in the same way. 13. Save your settings and close MTX Editor. A project file with the extension “. mtx” will be created. NOTE The settings you make while online are saved in the VPCEG25FX/B itself, but we recommend that you use MTX Editor to save them as a project file for future maintenance and readjustments. 6. Check the signal processing. Input an audio signal into the VPCEG25FX/B, and check the meter in MTX Editor to verify that the volume and routing are set correctly. 7. Check and edit the presets. Recall the presets, and verify that each has the correct settings. For details on presets and how to recall them, refer to “Recalling (switching) presets” on page 16. 8. Using the meter in MTX Editor, verify that the audio signals are being output from the VPCEG25FX/B at an appropriate level. Temporarily turn off the audio output from the VPCEG25FX/B. To prevent loud sound from the amp from damaging your speakers, we recommend that you turn off the audio output from the VPCEG25FX/B. VPCEG25FX/B Owner’s Manual 15 Various Procedures Recalling (switching) presets With the MTX system, input/output port patching, matrix mixer settings, and the parameters of XMV amps within the same MTX system are stored together as a “preset” in the VPCEG25FX/B and in MTX Editor for recall when desired. Each preset contains settings such as the following. • Input/output port settings and patching • Input/output channel gain and EQ settings • Matrix mixer settings • Zone settings • Routing settings • Effect settings • VCA and mute group settings • Parameter settings for XMV devices within the same MTX system • Preset name Using the scheduler The scheduler can switch presets or play music and sound effects from the SD memory card at the date and time you specify. Each such setting is called an “event. ” Event settings are made in the “Scheduler” dialog box of MTX Editor. For details on operation, refer to “MTX Editor User’s Manual. ” < Example 1 > Switching background music and playback area according to the time of day In commercial facilities that switch background music and playback areas at different times of the day, you can switch the type of music and the playback area according to the time of day. 9:00 12:00 14:00 18:00 22:00 Indoors Energetic music Outdoors Refreshing music Calm music No music No music Atmospheric music  Switching presets from the VPCEG25FX/B 1. [. . . ] Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 13 14 9 10 WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. (UL60065_03) VPCEG25FX/B Owner’s Manual 27 For details of products, please contact your nearest Yamaha representative or the authorized distributor listed below. Pour plus de détails sur les produits, veuillez-vous adresser à Yamaha ou au distributeur le plus proche de vous figurant dans la liste suivante. Die Einzelheiten zu Produkten sind bei Ihrer unten aufgeführten Niederlassung und bei Yamaha Vertragshändlern in den jeweiligen Bestimmungsländern erhältlich. Para detalles sobre productos, contacte su tienda Yamaha más cercana o el distribuidor autorizado que se lista debajo. NORTH AMERICA CANADA Yamaha Canada Music Ltd. 135 Milner Avenue, Scarborough, Ontario, M1S 3R1, Canada Tel: 416-298-1311 Yamaha Corporation of America 6600 Orangethorpe Ave. , Buena Park, Calif. [. . . ]