User manual SONY VPCEH12FX/B

[. . . ] €¢ The figure shows the minimum required space for installing the refrigerator. It differs from the space in the measurement condition of the amount of power consumption. €¢ It is possible to use the refrigerator with a less amount of power consumption by keeping greater space. €¢ If using the refrigerator in the space below dimension of the figure, it may cause the temperatures in the unit to rise, loud noise, and failure. [. . . ] €¢ Keep your refrigerator out of direct sunlight. €¢ Do not place next to heat generating appliance. €¢ Do not place directly on the ground. –  When transporting • Using the casters, it is possible to move back and forth. €¢ Carry the refrigerator by holding the handles located on the rear and bottom. –  ENGLISH ■ ■ Before using your refrigerator Clean the inside parts with a cloth soaked in warm water. If soapy water is used, wipe it off thoroughly with water. Utility pocket (large) knob (Only for SJ-T401R, SJ-CT401R) 8. ) • Do not replace the right and left 9. Hybrid cooling panel position of the utility pocket and (Aluminum panel) the utility pocket (large). Fruit and vegetable crisper (Only for SJ-T361R, SJ-T401R) Controlling temperature Adjustable by turning each knob. Fm Page 7 Monday, October 29, 2007 9:55 AM CARE AND CLEANING WARNING ■ ■ NOTE • To prevent damage to your refrigerator, do not use heavy Unplug the refrigerator first to prevent electric shock. Do not splash water directly on the outer cabinet or the interior. This may lead to rusting and deterioration of the electrical insulation. IMPORTANT To prevent cracking on inside surfaces and plastic components, follow these tips. • Wipe any food oils adhered to plastic components. €¢ Some household chemicals may cause damage, so use only diluted washing-up liquid (soapy water). €¢ If undiluted detergent is used or soapy water is not wiped off thoroughly, cracking of plastic parts can result. Duty cleansers or solvents (lacquer, paint, polishing powder, benzine, boiled water, etc. €¢ If the power supply is disconnected, please wait for at least 5 minutes before re-connecting power. • The glass shelves weigh approximately 2 kg each. Hold firmly when removing from the cabinet or carrying. [. . . ] €¢ Loud noise produced once a day by the compressor --- Operating sound produced immediately after automatic defrost operation. €¢ Sound of flowing fluid (gurgling sound, fizzing sound) --- Sound of refrigerant flowing in pipes (sound may become louder from time to time). €¢ Cracking or crunching sound, squeaking sound --- Sound produced by expansion and contraction of inner walls and internal parts during cooling. This may occur in one of the following cases. [. . . ]