User manual SONY VAIO VPC-EL13FX/W DATASHEET

[. . . ] 9 Locating Controls and Ports. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 About the Indicator Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Connecting a Power Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Using the Battery Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The power indicator light is unlit in this mode. If you do not intend to use your computer for a long period of time, place the computer into Hibernate mode. To activate Hibernate mode Press the Fn+F12 keys. Alternatively, you can click Start, the arrow next to the Lock button, and Hibernate to place the computer into Hibernate mode. When your computer is in Hibernate mode, you cannot insert a disc. Hibernate mode requires more time than Sleep mode to be activated. Hibernate mode uses less power than Sleep mode. !Do not move your computer before its power indicator light turns off. Customizing Your VAIO Computer > Using the Power Saving Modes n 86 N To return to Normal mode Press the power button. The computer returns to its normal state. !If you press and hold the power button for more than four seconds, your computer will turn off automatically. It takes more time to return to Normal mode from Hibernate mode than from Sleep mode. Customizing Your VAIO Computer > Using the VAIO Power Management n 87 N Using the VAIO Power Management Power management helps you set up power plans for running on AC or battery power to suit your requirements for power consumption. The VAIO Power Management is a software application developed exclusively for VAIO computers. With this software application, you can enhance the Windows power management functions to ensure better operation of your computer and longer battery life. See the help file included with the software for more information. Selecting a Power Plan When you start the computer, a power status icon appears on the taskbar. This icon indicates what kind of power source you are using at that time, for example, AC power. Before you upgrade your computer's memory, read the notes and procedures in the following pages. Notes on adding/removing memory modules Be sure to place your computer on a flat surface before adding or removing memory modules. Improper installation of memory modules may cause damage to your system. This damage may void your manufacturer's warranty. Only use memory modules that are compatible with your computer. If a memory module is not detected by the computer or the Windows operating system becomes unstable, contact the sales dealer or the manufacturer of your memory module. Electrostatic discharge (ESD) can damage electronic components. Before touching a memory module, ensure the following: The procedures described in this document assume user familiarity with the general terminology associated with personal computers and with the safety practice and regulatory compliance requirements for using and modifying electronic equipment. Turn off your computer and disconnect it from its power sources (battery pack and AC adapter) and from any telecommunication links, networks, or modems before you remove any cover or panel from the computer. Failure to do so may result in personal injury or equipment damage. ESD can damage memory modules and other components. Install the memory module only at an ESD workstation. [. . . ] ArcSoft and the ArcSoft logo are registered trademarks of ArcSoft, Inc. ArcSoft WebCam Companion is a trademark of ArcSoft, Inc. ATI and ATI Catalyst are trademarks of Advanced Micro Devices, Inc. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. [. . . ]