User manual SONY XR-4750RDS

[. . . ] This unit lets you enjoy a variety of features by using a rotary remote. Before operating the unit for the first time or after replacing the car battery, you must reset the unit. Attach part A of the front panel to part B of the unit as illustrated and push until it clicks. The front panel of this unit can be detached to prevent the unit from being stolen. [. . . ] Note This function does not work in the United Kingdom and in some other areas. The Local Link function lets you select other local stations in the area, even though they are not stored in your presets. Press (AF/TA) until "AF" lights up on the display. The unit starts searching for an alternative station with a stronger signal in the same network. Within five seconds, press again the preset number button of the local station. Repeat this procedure until the desired local station is received. Note When there is no alternative station in the area, and you don't need to search for an alternative station, turn the AF function off by pressing (AF/TA) until "AF" disappears. Each time you press (AF/TA), the displayed items change as follows: z AF z TA z AF TA* Blank Z * Select this to turn on both AF and TA functions. If the station name starts flashing after selecting a station with the AF function on, this indicates that no alternative frequency is available. Press (SEEK/AMS) while the station name is flashing (within eight seconds). The unit starts searching for another frequency with the same PI (Programme Identification) data ("PI seek" appears and no sound is heard). If the unit cannot find another frequency, "NO PI" appears, and the unit returns to the originally selected frequency. The Traffic Announcement (TA) and Traffic Programme (TP) data let you automatically tune in an FM station that is broadcasting traffic announcements even though you are listening to other programme sources. Press (AF/TA) until "TA" or "AF TA" lights up on the display. the unit starts searching for traffic information stations. "TP" lights up on the display when the unit finds a station broadcasting traffic announcements. When the traffic announcement starts, "TA" flashes, then flashing stops when the traffic announcement is over. Tip When the traffic announcement starts while you are listening to another programme source, the unit automatically switches to the announcement and goes back to the original source when the announcement is over. notes · "NO TP" flashes for five seconds if the received station doesn't broadcast traffic announcements. Then, the unit starts searching for a station that does broadcast traffic announcements. When the "EON" indication appears with "TP" on the display, the current station makes use of broadcast traffic announcements of other stations in the same network. When you preset the RDS stations, the unit stores each station's data as well as its frequency, so you don't have to turn on the AF or TA function every time you tune in the preset station. [. . . ] Tip The unit decreases the volume automatically when a telephone call comes in (Telephone-mute function). To obtain the beep tone again, press these buttons again. If your car was parked in direct sunlight resulting in a considerable rise in temperature inside the car, allow the unit to cool off before operating it. If no power is being supplied to the unit, check the connections first. [. . . ]