User manual SONY XR-L240

[. . . ] Thank you for purchasing this Sony Cassette Player. If your car was parked in direct sunlight resulting in a considerable rise in temperature inside the car, allow the unit to cool off before operating it. If no power is being supplied to the unit, check the connections first. If everything is in order, check the fuse. [. . . ] Scanning stops when the unit receives a station. Press either side of (SEEK/MANU) repeatedly until the desired station is received. Local Seek Mode: If the automatic tuning stops too frequently, press (SENS) repeatedly until "LOCAL-ON" appears. Press either side of (SEEK/MANU) to tune in the station that you want to store on the number button. Press the desired number button ((1) to (6)) until "MEM" appears. Only the stations with relatively strong signals will be tuned in. Tip If you know the frequency of the station you want to listen to, press either side of (SEEK/MANU) until the desired frequency appears (manual tuning). Note If you try to store another station on the same number button, the previously stored station will be erased. During radio reception, press (SENS) repeatedly until "MONO-ON" appears. Press the number button ((1) to (6)) on which the desired station is stored. Your car stereo offers you a variety of services. Here are just a few: retuning the same programme automatically, listening to traffic announcements, and locating a station by programme type. notes · Depending on the country or region, not all of the RDS functions are available. RDS may not work properly if the signal strength is weak or if the station you are tuned to is not transmitting RDS data. By using this function, you can continuously listen to the same programme during a longdistance drive without having to retune the station manually. The unit starts searching for an alternative station with a stronger signal in the same network. Note When there is no alternative station in the area and you do not need to search for an alternative station, turn the AF function off by pressing (AF) repeatedly until "AF-OFF" appears. Note The "*" indication means that an RDS station is being received. Each time you press (DSPL), the item changes as follows: station Name* (Frequency) y Clock * When you tune in an FM station that transmits RDS data , the station name appears. Note "NO NAME" appears if the received station does not transmit RDS data. Each time you press (AF), the item changes as follows: aF-ON y AF-OFF Notes · When "NO AF" and the station name flash alternately, it means that the unit cannot find an alternative station in the network. If the station name starts flashing after selecting a station with the AF function on, this indicates that no alternative frequency is available. [. . . ] You can locate the station you want by selecting one of the programme types shown below. Presetting different settings for each preset station " Press the desired number button until "MEM" appears. Repeat from step 1 to preset other stations. Tip If you want to change the preset AF and/or TA setting after you tune in the preset station, you can do so by turning the AF or TA function on or off. [. . . ]