User manual SPRINT ES400S

[. . . ] User Guide ES400S www. sprint. com © 2010 Sprint. Sprint and the logo are trademarks of Sprint. Other marks are the property of their respective owners. 8/29/10 No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means, without permission in writing from Motorola. [. . . ] Ensure that the two devices are within 30 feet (10 meters) of one another. 3. Tap Start > Settings> Bluetooth > Devices. 2H. Bluetooth 85 Bluetooth Syncing Using Bluetooth Use the wireless Bluetooth serial port connection for syncing just as you would a physical USB cable connection. You must configure the application that will use the connection to the correct serial port. To set up a Bluetooth sync connection: Before setting up a Bluetooth ActiveSync connection, configure the Bluetooth function of your device. Note: For additional security, disable network bridging on the computer (specifically, bridging to a Remote NDIS adapter) before connecting to the computer to pass though to the Internet or a network. For more information on network bridging, see Windows Help on your computer. The instructions below are for computers that support the Windows XP SP2 or later version operating system. 4. On the Options tab, select the Turn discovery on and Allow Bluetooth devices to connect to this computer check boxes. 6. Select the Incoming (device initiates the connection) option, then click OK. 8. Note the number of the COM port that was added. Click Start > All Programs > Microsoft ActiveSync or Windows Mobile Device Center (WMDC). 11. For ActiveSync, click File > Connection Settings. For WMDC, click Connection Settings. 12. On the Allow connections to one of the following drop-down list, select the COM port with the number you noted earlier. 1. Ensure that Bluetooth is enabled and discoverable on both devices. 13. On the ES400S, tap My Apps > ActiveSync. Tap Menu > Connect via Bluetooth. Synchronization is automatically initiated. 2. Ensure that the two devices are within 30 feet (10 meters) of one another. 3. On the computer, click Start > Control Panel. 86 2H. Bluetooth If an Authentication is required, the Enter Passcode screen appears. Type an alphanumeric passkey (PIN code), and then tap Next; enter the same passkey on the other device. The passkey is recommended for enhanced security. Your passkey must be between 1 to 16 alphanumeric characters. [. . . ] You can recover from Microsoft and its affiliates only direct damages up to fifty U. S. $50. 00), or equivalent in local currency. You cannot recover any other damages, including consequential, lost profits, special, indirect or incidental damages. This limitation applies to: 166 4A. [. . . ]