User manual STANTON C.313

[. . . ] C. 313 PROFESSIONAL TABLETOP CD PLAYER USER MANUAL INTRODUCTION Thank you for purchasing Stanton's newest innovation in professional tabletop CD players. The C. 313 CD player was designed to bring style and reliability to the mobile or club DJ at an affordable cost. Designed with full MP3 functionality for DJs who wish to play CDs with an interface similar to vinyl, this workhorse tabletop CD player features a large jog wheel, making it easy to cue tracks comfortably. The unit also features an easy-to-read amber LCD display with a track position marker, 10-second antishock buffer to eliminate embarrassing "skips", adjustable pitch range, digital key lock, pitch bend, and reliable, auto cue and instant start offer even more control and flexibility. [. . . ] See operating instructions for further explanation. ELAPSED / TOTAL / REMAIN ­ Indicates whether the time shown on the display refers to total remaining time or track remaining time. If either of these are not illuminated, this indicates elapsed track time. SETUP CHECKING THE CONTENTS ­ Check that the carton contains all of the following items. · Tabletop CD player unit · Printed user's manual · One RCA cable · One power cable · One fader start / relay cable INSTALLING THE UNIT · Place the unit on a flat, level surface. · Be sure the player is in a well-ventilated area where it will not be exposed to direct sunlight, high temperatures, or high humidity. · Try to place the unit as far as possible from Tvs and tuners, as the unit may cause undesirable interference. · The player will work normally when the unit is within 15 degrees of the vertical plane. If the unit is tilted excessively, discs may not load or unload properly, or playback may be adversely affected. CAUTION CONNECTIONS · Make sure that the unit and any other equipment in the signal chain are · Be sure to use the supplied cables. Using other types of cables may result in unit damage. turned off prior to making any connections. · Connect the RCA cable to the rear of the unit and to the input on your · To avoid severe damage to the unit, be sure the power is OFF when making any connections. · Connect the power cable to the rear of the unit and to a proper AC outlet. 6 OPERATING INSTRUCTIONS UPDATING FIRMWARE Checking Firmware Version · Turn the unit off. · Hold down the sample MODE while powering up the unit. · Release MODE to go back to the normal playback mode. Updating The Firmware Firmware updates may, as necessary, become available from Stanton's website (www. stantondj. com) as downloadable ISO files, which are needed to create a bootable CD. We recommend using Magic ISO Maker (www. magiciso. com) PC software to burn the disc. · Once you have burned a bootable disc from the ISO file, insert the CD into the C. 313. The display will read UPDATE, then SUCCESS. · The unit will automatically eject the CD once the update is complete. · Turn the unit off and back on to complete the update process. Browsing · Turn the BROWSE encoder to browse the list of tracks on the CD. [. . . ] CAUTION: DO NOT place foreign objects on the disc tray and do not place more than one disc on the tray at a time. Doing so may result in malfunction and damage of the unit. DO NOT push the disc tray in manually, as this may also result in malfunction and damage. Removing the disc from the drive before powering off will insure that the laser pick-up remains properly calibrated over time. DO NOT POWER OFF UNIT WHILE DISC IS INSERTED BURNING CD-R's CD-RW's When burning CD-R's or CD-RW's for the C313, it is strongly recommended to set your burner at 8x write speed. You can change the write speed within your CD burning software. [. . . ]