User manual STANTON C.324

[. . . ] Manual_C324-A Originator: HANPIN 01/10/2008 Size: 215. 9*279. 4mm Pages 12 PROFESSIONAL TABLE TOP CD PLAYER C. 324 USER'S MANUAL Manual_C324-A Originator: HANPIN 01/10/2008 Size: 215. 9*279. 4mm Pages 12 IMPORTANT SAFETY PRECAUTIONS 1. Read Instructions ­ All the safety and operating instructions should be read before this product is operated. Retain Instructions ­ The safety and operating instructions should be retained for future reference. Heed Warnings ­ All warnings on the appliance and in the operating instructions should be followed. [. . . ] The disc will not eject unless the player is in cue or pause mode. This prevents accidentally ejecting the disc when in play mode. SELECTING TRACKS Whether using MP3 or standard audio discs, tracks can be selected in one of two ways: Select the desired track by pressing the Track BACK or FORWARD buttons to move to the previous or next track. When a new track is selected during playback, playback begins as soon as the track selection is completed. Press the BROWSE button located to the left of the LCD display. Turn the encoder to browse the list of tracks on the CD. While the track number is flashing, push down on the encoder to select the track. If it is an MP3 disc with folders, use the FOLDER encoder to browse folders as desired. The FOLDER button will light up when in Folder mode. CD SLOT IN Insert your CD in the CD Slot. Make sure that you only hold the CD with 2 fingers on the edge. Avoid touching the inside area of the CD. Carefully place a CD with the image facing up into the CD slot. When inserting a CD of 12cm in diameter, use a conventional adapter. 7 Manual_C324-A Originator: HANPIN 01/10/2008 Size: 215. 9*279. 4mm Pages 12 OPERATING INSTRUCTIONS Press the PLAY/PAUSE button during the pause or cue mode to start playback. The PLAY/PAUSE button illuminates with a solid green light during playback. STARTING PLAYBACK STOPPING PLAYBACK There are two ways to stop playback. Press the PLAY/PAUSE button during playback to pause at that point, or press the CUE button during playback to return to the position at which playback started. Once the PITCH BEND + button is released the pitch will return to the pitch set by the PITCH SLIDER. The jog wheel can also be used to temporarily bend the pitch of the music during normal playback. Rotate the wheel clockwise to speed up and counterclockwise to slow down. The speed that you rotate the jog wheel determines the percent of pitch bend. It is recommended that you use the outer edge of the jog wheel for this type of control, as touching the top surface may cause interruption of playback in certain modes of operation. Key Lock This function allows the tempo or BPM of the music to be altered without affecting the musical key. While this button is illuminated, the key will be locked at zero. This is handy when accelerating tracks to avoid the chipmunk effect. CUEING Cueing is the action of preparing tracks for playback. When the CUE button is pressed, playback returns to the cue point and enters pause mode. [. . . ] Repairs made necessary by reason of misuse, alteration, normal wear, or accident are not covered under this warranty. Returns Authorized Stanton dealers are only authorized to sell and distribute merchandise within a specific country. All goods requiring warranty repair or replacement must be returned (freight prepaid if not hand-delivered) to the authorized Stanton dealer from whom the merchandise was purchased and in the same country where the merchandise was purchased. For purposes of purchases made via the Internet, the merchandise must be returned to the authorized Stanton dealer in the country where the authorized Stanton dealer which sold the merchandise to purchaser is located and not the authorized Stanton dealer in the country where the purchaser is located or the country in which the merchandise was received. [. . . ]