User manual STANTON M.212

[. . . ] Grounding or Polarization ­ This product may be equipped with a polarized alternation-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. [. . . ] Replacement Parts ­ When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. Safety Check ­ Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating conditions. This product is in compliance with EU WEEE regulations. Disposal of end of life product should not be treated as municipal waste. Please refer to your local regulations for instructions on proper disposal of this product. Carts and Stands ­ The appliance should be used only with a cart or stand that is recommended by the manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn. 8. 9. 10. 13. CAUTION: To reduce the risk of electric shock, do not remove any cover. Refer servicing to qualified service personnel only. The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the user to the presence of un-insulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operation and maintenance (servicing) instructions in the literature accompanying this appliance. CAUTION: To prevent electric shock, do not use this polarized plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure. II INTRODUCTION Thank you for purchasing Stanton's newest innovation in professional tabletop mixer. The M. 212 mixer was designed to bring style and reliability to the mobile or club DJ at an affordable cost. MAIN FEATURES 2 bend EQ w/ input GAIN control per channel. Fader Start Power on/off muting Long Life crossfader Crossfader curve control ACCESSORIES Checking Package Contents Check that the carton contains the following items: (1) M. 212 Mixer (2) AC adaptor (3) User's Manual 1 CONTROL OVERVIEW TOP PANEL 1. Channel Gain - Adjusts the pre-fader volume for cleaner sound. Reduce the channel gain if you notice the level indicators flashing red. Mic Input Gain - Adjusts microphone input level. Mic EQ - The mic channel includes a two-band EQ with a range of +10 dB to -10 dB. Channel EQ - Adjusts the high, mid and low frequency levels of the input channels for either making the treble or bass louder or to be used as an effect. Input Fader - Controls individual source levels (channels) in the mix. Crossfader Curve - The CUT setting allows the use of the crossfader for quick cut in and out when scratching and mixing. The FADE setting is used for longer segues, typically when mixing between two beat-matched sources. Crossfader - Used to mixthe sound from both channels. [. . . ] Now you are ready to switch everything on. IMPORTANT: Always switch on your audio input sources, such as turntables or CD players first, then your mixer, and finally any amplifiers. When turning off, always reverse this operation by turning off amplifiers, then your mixer, and then input devices. Turntable Power Supply Turntable DC 6V CD Player Controller DAT, etc. Power Amp. 4 SPECIFICATIONS Input / output impedance & sensitivity: (Master 0 dBV output, load= 100k ohm, Max, Gain, EQ flat) Line 10k ohm /-14 dBV (200 mV) +/-2 dB Phono 47k ohm /-50 dBV (3. 16mV) +/-2 dB Mic 2. 2k ohm /-60 dBV (1mV) +/-2 dB Master 1k ohm Phones 33 ohm / 0 dBV (1V) ±2 dB Max. output (THD= 1%, Maximum gain, EQ flat) Master Phones More than +18 dBV (8. 0V) at load= 100k ohm More than +4 dBV (1. 6V) at load= 32 ohm Channel balance: Within 3 dB Frequency response: (Master output, EQ flat) Line Phono Mic 20-20 kHz +/- 2 dB 20-20 kHz +2, -3 dB (RIAA) 20-20 kHz +2/-3 dB S/N ratio: (Maximum gain, master 0 dBV output, EQ flat, w/20 kHz LPF, A-weighted) Line Phono Mic Less than -80 dBV Less than -70 dBV Less than -60 dBV THD + N: (Master 0 dBV output, maximum gain, w/ 20 kHz LPF) Line Phono Mic Phones Less than 0. 05% 20 - 20 kHz Less than 0. 1% 20 - 20 kHz (IEC-A WTD) Less than 0. 2% 20 - 20 kHz (IEC-A WTD) Less than 0. 1% 20 - 20 kHz (From line input) Crosstalk: (From master output, A-weighted) Line/Phono MIC EQ: Hi Low Channel EQ: Hi Mid Low Power Source: Dimensions: Weight: 9 +/- 2 dB at 13 kHz -15 +/- 3 dB at 13 kHz 9 +/- 2 dB at 1 kHz Less than -23 dB at 1 kHz 9 +/- 2 dB at 70 Hz -26 +/- 3 dB at 70 Hz DC 6V 230 (W) X 267 (D) X 111 (H) mm 1. 65 kg 10 +/- 2 dB at 10 kHz -10 +/- 2 dB at 10 kHz 10 +/- 2 dB at 100 Hz -10 +/- 2 dB at 100 Hz More than 70 dB at 1 kHz between L and R More than 70 dB at 1 kHz between channels 5 WARRANTY & RETURN POLICY Warranty Through Stanton's authorized dealers around the World, Stanton, or one of Stanton's authorized distributors outside the U. S. , will, without charge, repair or replace, at the sole discretion of the entity responsible for making the repair or providing the replacement, any Stanton merchandise proved defective in material or workmanship for a period of one year following the date of original purchase. [. . . ]