User manual STANTON RM-100

[. . . ] Again, we appreciate your patronage, and look forward to many years of making music together. Low frequency hum while operating source unit. Problem Excessive hum when using phono source. Cause Poor ground connection. Solution Properly connect turntable ground wire to mixer ground terminal. Check cartridge connection to headshell. Check all input and output connections for secure fit. [. . . ] Cue pan: Fades the headphone output between the channel(s) selected by the cue assign switches (17) and the master one output, effectively allowing the user to preview a mix. Send/return: Send and Return levels are used to control the volume of the external effects unit used in the effects loop. Crossfader source selectors: When set to A, the selecte channel will be assigned to the left side of the crossfader. when set to B, the selected channel will be assigned to the right side of the crossfader. When set to BYPASS, the crossfder will be bypassed alltoghter. Crossfader: Fades the master output between the channels selected by the Crossfader source selectors (13). Beat indicators: Illuminate according to the beat of the program music. The replacement of illumination varies depending on the style of music selected. This features offers a helpful visual indicator of beat alignment. Channel fader: Controls the input channel level. Cue assign switch: Selects the channel to be monitored. Fader Start: Turns the fader start function ON or OFF. The fader start will work with CD players (such as Stanton's S-Series) to start the audio from the CD player's cue point. Talkover attenuation control: Sets the amount of attenuation applied to the music output signal when switch (20) is applied and the mic is spoken into. The attenuation is adjustable from zero to 26 decibels. Mic selector: Turns the mic on or off and activates the automatic talkover circuit. When activated, the automatic talkover circuit reduces the music output based on the setting of the talkover attenuation control (19). FX switch: Turns effect send signal ON or OFF for each channel 22. Equalizer: Individual controls for low frequency, midrange, and high frequency equalization with (+10/-10 dB) Note: Any changes made to EQ settings will change the overall output level. Microphone volume: Controls the output levels of mics 1 and 2 24. Input channel controls: Controls the input sensitivity of each channel and Hi, Mid, and Low frequency equalization (+9/-26dB) of each channel. Microphone 1 input: Combo XLR / 1/4" connector 26. [. . . ] Booth output is a second master output used mostly for in-booth monitoring. AC cord connector: Input connection for the supplied removable AC cord. Send/return connetions: Connect the send output to the input of an outboard signal processor, such as the Stanton DJF-1 DJ filter. Connect the return input to the output of the outboard signal processor to create an effect loop. WA R R A N T Y This unit has been designed and manufactured using quality components. [. . . ]