Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual STANTON RM-THREE. We hope that this STANTON RM-THREE user guide will be useful to you.
Lastmanuals help download the user guide STANTON RM-THREE.
Detailed instructions for use are in the User's Guide.
[. . . ] Check cartridge connection to headshell. Check all input and output connections for secure fit. Connect amplifier or outboard gear to master output. Properly connect AC cord to AC power source. [. . . ] Repeated compression of the cord may lead to electrical shorting. · To avoid damage due to AC voltage peaks, always disconnect your mixer from the power source during electrical storms. · Your mixer contains no user-serviceable parts. The manufacturer is not responsible for any damage or personal injury resulting from unauthorized user-servicing or modifications. In addition, the warranty will be void if any unauthorized service by the user is detected. Always return you mixer to an authorized Stanton dealer for servicing.
Blown fuse.
The amplifier is turned up, but there is no signal.
Faulty output connections Improper level adjustment.
No signal in headphones.
Improper connection. Improper level or cue mix settings.
D E S C R I P T I O N O F FU N C TI O N S
1. Microphone 2 input: 1/4" connector 3. Mic level controls: Controls the overall microphones output level 4. Mic EQ: Controls for low frequency, midrange, and high frequency equalization of both microphones with (+/-12 dB) Note: Any changes made to EQ settings will change the overall microphone output level 5. Effect ON/OFF switches: Turns effect send signal ON or OFF for each channel 6. Cue ON/OFF switches: Turns Cue signal ON or OFF for each channel 7. Input selector switches: Selects the audio signal source for each channel 8. Gain control: Controls the input sensitivity of each channel 9. EQ: Individual controls for low frequency, midrange, and high frequency equalization with (+9/-26 dB) Note: Any changes made to EQ settings will change the overall output level 10. Pan control: Controls left/right output balance of each channel 11. Channel faders: Controls the output level of each channel 12. Crossfader Reverse: Reverses the direction of the crossfader 13. Frequency Kill switches: Individual kill controls for low frequency, midrange, and high frequency of channels 1 and 3 14. Crossfader: Fades the master output between channels 1 and 3. Headphone output: Connection for 1/4 inch headphone. It is recommended headphones with an impedance rating of 200 ohms or less be used for maximum volume 16. [. . . ] Ground connectors are usually supplied with turntables 27. Master output: Connects to an amplifier, EQ, crossover, or other outboard signal processing. Send output: Connects to the input of an outboard signal processor (such as the NEXT!Return input: Connects to the output of the outboard signal processor to create an effect loop 30. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE STANTON RM-THREE
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual STANTON RM-THREE will begin.
