User manual STANTON S.252

[. . . ] A grounding plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and at the point where they exit from the apparatus. Only use attachments/accessories specified by the manufacturer. [. . . ] Invisible laser radiation when open and interlocks defeated. Avoid exposure to beam of laser. CAUTION: To reduce the risk of electric shock, do not remove any cover. Refer servicing to qualified service personnel only. The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operation and maintenance (servicing) instructions in the literature accompanying this appliance. CAUTION: To prevent electric shock, do not use this polarized plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure. Line voltage selection (for multiple voltage model only) 1) The desired voltage may be set with the VOLTAGE SELECTOR switch on the rear panel of the main unit, using a screwdriver. 2) Do not twist the VOLTAGE SELECTOR switch with excessive force as this may cause damage. 3) If the VOLTAGE SELECTOR switch does not move smoothly contact a qualifited serviceman. 1 NOTE ON USE · Allow for sufficient heat dispersion when installed on a rack. · Handle the power cord carefully. · Hold the plug when unplugging the cord. · Keep the set free from moisture, water, and dust. · Unplug the power cord when not using the set for long periods of time. · Do not obstruct the ventilation holes. (For sets with ventilation holes. ) · Do not let foreign objects in the set. · Do not let insecticides, benzene, and thinner come in contact with the set. · Never disassemble or modify the set in any way. FUNCTIONS 1) EJECT: Opens the CD door 2) STOP: Stops the CD. 3) SKIP: Skips through the tracks on the CD, forward or back. 4) : Scans forward or back through the current track. Keep the or button pressed for a few seconds to change the scan speed. 12) LOOP: Press once to set starting loop point, press again set ending point and enter loop. 13) LCD DISPLAY: Shows time (minutes, seconds, frame), and pitch information. 14) PITCH FADER: Used to speed up or slow down current track. 15) AUDIO OUT: This stereo line output connects to the line input on any DJ mixer. 16) DIGITAL OUTPUT: This coaxial (S/P DIF) digital output connects to any RCA S/P DIF input, as found on most standard computer sound cards or CD burners. 5) PLAY/PAUSE: Plays or pauses the CD. [. . . ] T initiate a warranty repair, you must contact the authorized Stanton dealer from whom you purchased the merchandise, and follow such authorized o Stanton dealers return policy. Stanton assumes no risk and shall be subject to no liability for damage or loss resulting from the specific use or application made of the merchandise. Stantons liability for any claim, whether based on breach of contract, negligence, infringement of any rights of any party, or product liability, and relating to the merchandise shall not exceed the price received by Stanton from our purchase of such merchandise. In no event will Stanton be liable for any special, incidental or consequential damages (including loss of use, loss of profit and claims of third parties) however caused, whether by the negligence of Stanton or otherwise. [. . . ]