User manual STANTON S-350

[. . . ] PROFESSIONAL CD PLAYER IN OUT CUE TIME USERS MANUAL Important To Safety WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. Handle the power supply cord carefully Do not damage or deform the power supply cord. If it is damaged or deformed, it may cause electric shock or malfunction when used. When removing from wall outlet, be sure to remove by holding the plug attachment and not by pulling the cord. [. . . ] BANK BUTTONS Press the desired BANK button when the MEMORY LED is lit will set the memory mode. The music from the cue point will be memorized to the flash. Press the desired BANK button when the SAMPLER LED is lit will set the sampler mode. The sampler length is determined by the smaller one of out point and bank length. Press the desired BANK button will return to the start point instantly. The LED of the BANK button last pressed will be flashing. PITCH SLIDER This slider is used to adjust the playback pitch percentage. The slider is a set adjustment and will remain set until the pitch slider is move or the pitch function has been turned off. TIME BUTTON The TIME button will switch the time value described in the time meter between elapsed play time, track remaining time, and total remaining time. SGL/CTN BUTTON This function allows you to choose between single track play or continuous track play (all tracks in order). PITCH -/+ BUTTONS The desired pitch of CD decrease or increase when button is pressing and returns to the original pitch when the button is released. MINUTE, SECOND, FRAME Displays the time of track(s) currently selected in increments of Minutes, Seconds, and Frames. TIME BAR Shows either time remaining or elapsed depending on the setting of the TIME button. PITCH Indicator light to show when pitch is displayed. PITCH Shows the numerical percentage of the song. ANTI SHOCK AND BUFFER INDICATOR Indicates the current status of the Buffer Memory. This is represented on the display by a bucket being filled or emptied. The bucket itself represents the instant start function (which works by buffer memory). If the bucket is flashing, the instant start is not available. Each bar within the bucket represents 2 seconds of anti shock protection. There is up to 10 seconds of anti shock available. CUE Indicates the unit is at a cue point and is ready to play. [. . . ] w When the currently playing track ends, playback will begin automatically on the standby player. w The first player will enter standby mode at the beginning of the next track on its disc. w By repeating this operation, the two players can be used to perform continuous relay play. w By loading new discs on the standby player, you can construct a continuous program of whatever tracks you wish. [. . . ]