User manual STANTON S-500

[. . . ] USER MANUAL IMPORTANT TO SAFETY IMPORTANT TO SAFETY WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. Handle the power supply cord carefully Do not damage or deform the power supply cord. If it is damaged or deformed, it may cause electric shock or malfunction when used. When removing from wall outlet, be sure to remove by holding the plug attachment and not by pulling the cord. [. . . ] (6) PITCH + Button The CD speeds up while this button is pressed. Release the button to return to the original BPM. (7) PITCH (Pitch Button) Use these button to enable or disable BPM adjustment with the pitch sliders. BPM adjustment with the pitch sliders is enabled when the PITCH LED lights. (8) Pitch Slider Use the slider to adjust the CD pitch. Slide up to decrease the pitch, down to increase the pitch. (9) PLAY/PAUSE Button Use the button to start playback. Press once to start playback, once again to set the pause mode, and once more to resume playback. (10) SGL/CTN (Single/Continuous Button) Press it to switch between the single and continuous play modes. The SINGLE mode is indicated by the SINGLE indicator on the LCD. (11) CUE (Cue Button) Press the CUE button during playback to return to the position at which playback started. Press the PROGRAM button, the player will enter the program mode and stop the CD playback. SKIP Use these button to go back to the beginning of the current track or select a previous track for playing. (14) , (15)SEARCH/SCAN Press these buttons to perform frame search function during pause mode or to perform scan function during play mode. SKIP Use these button to skip to the next CD track. (17) PITCH (Pitch Indicator) Moving the pitch slider will change the pitch only when the pitch LED is illuminated. (18) REALY By pressing the RELAY button, the playback automatically switches to the other player after every track. Do not push the disc holder in manually when the power is off, as this may result in malfunction and damage the player. 3. Selecting Tracks l l l l Press the SKIP button once to move to one higher or lower track. Hold the SKIP button to change tracks continuously at a higher speed. When a new track is selected during playback, playback begins as soon as the skip search operation is completed. button is pressed while at the last track, the first track is selected. [. . . ] In this way, you have the possibility to enlarge the music program by using several CDs. Possibility 1: Connect the Control-sockets of the two CD-players with one another. The Relay-button must remain unpressed (LED off). Press the Single-button (The display shows "SINGLE") on both CD-player. [. . . ]