User manual STANTON S-700

[. . . ] REVERSE R E W IN D N OR M A L FOR W A R D REVERSE R E W IN D N OR M A L FOR W A R D PLAY PAUSE PLAY PAUSE MOTOR OFF BRAKE MOTOR OFF BRAKE IMPORTANT TO SAFETY WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. Handle the power supply cord carefully Do not damage or deform the power supply cord. If it is damaged or deformed, it may cause electric shock or malfunction when used. When removing from wall outlet, be sure to remove by holding the plug attachment and not by pulling the cord. [. . . ] PROGRAM Lit when program mode is set or played. SINGLE - Lit when the unit is set to play just one track at a time. When this is not lit the CD will play continuously through all tracks. The function is controlled by the SGN/CTN BUTTON. ELAPSED, TOTAL REMAIN - These indicate that the time shown on the display is the ELAPSED, TOTAL REMAINING or single song remaining time. LOOP - Lit when the CD is repeating a particular area with the music on the CD. RELOOP Lit when the CD has had a loop set previously and can go back to loop again. 5. TRACK shows the track that is currently playing. TRACK, MINUTE, SECOND, FRAME These displays indicate information on the current track and time 15. BPM - Lit when BPM button is engaged 16. PITCH/BPM Shows either the percentage change in pitch or the BPM of the song depending on the mode selected with the BPM BUTTON. PITCH - Indicator light shows percentage of pitch is displayed. ANTI SHOCK AND BUFFER INDICATOR The memory status is represented on the display by a bucket being filled or emptied. The bucket itself represents the instant start function (which works by buffer ). If the bucket is not lit, the instant start is not available. Each bar within the bucket represents 5 seconds of anti shock protection. There is up to 20 seconds of anti shock available. In Playback Mode, It takes 20 seconds to enable the Anti Shock. In Pause Mode, It will take only 10 seconds to enable the Anti Shock. Loading discs Hold the disc by the edges and place it in the disc tray. Do not touch the single surface (the glossy side). When using 12cm discs, place the disc in the outer tray guides. [. . . ] The LED will light off when Relay is disabled. STUTTER EFFECT It can create a sound similar to a CD skipping. The STUTTER Effect can be created in 2 ways. (1) By rapidly pressing the CUE BUTTON (14) a. [. . . ]