Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual STANTON STR8-100 TURNTABLE. We hope that this STANTON STR8-100 TURNTABLE user guide will be useful to you.
Lastmanuals help download the user guide STANTON STR8-100 TURNTABLE.
Manual abstract: user guide STANTON STR8-100 TURNTABLE
Detailed instructions for use are in the User's Guide.
[. . . ] Remove the main unit with the packing from the box and take off the packing. Insert the turntable platter onto the center spindle. Hold the ribbon tape which is attached to the belt and loop the belt over the motor pulley. [. . . ] Hold the ribbon tape which is attached to the belt and loop the belt over the motor pulley. Be sure it does not twist.
Ribbon tape Driving roller Drive belt
5.
6.
7.
Insert the headshell into the front end of the tonearm, then turn the lock nut clockwise with the headshell firmly held horizontally. Twist it lightly and it will screw onto the rear shaft of the tonearm. Adjustment of horizontal zero (0) balance and stylus pressure: (a) Remove the stylus protector, do not touch the
8.
stylus tip during the adjustment. (d) Release the arm clamp and lift the tonearm from the arm rest to free it. (c) Rotate the counterweight until the tonearm is approximately balanced horizontally (floats freely). (d) Refasten the tonearm with the arm clamp. (e) Hold the counterweight stationary with one hand and rotate only the stylus-pressure ring to bring the number "0" of the ring into alignment with the center line on the tonearm rear shaft. Place a record on the slip mat, when playing a 45rpm record with a large center hole, place the 45rpm adaptor on the center spindle. Set the rotation speed (33/45) to match the record. Remove the stylus protector, release the arm clamp. Press the Start/Stop button, the turntable platter will start to rotate. Move the tonearm over the desired groove. When play is finished, move the tonearm to the arm rest, secure the tonearm with the arm clamp. Press the Start/Stop button to stop the platter rotating, push the power button to turn off the power.
MAINTENANCE
· For best results & proper care of your equipment use Stanton Vinyl Cleaner (VC-1) for your records and Stylus Cleaner Kit for styli (SC-4). · Clean the stylus periodically with a soft brush to prevent the accumulation of dust. [. . . ] Press the Start/Stop button to stop the platter rotating, push the power button to turn off the power.
MAINTENANCE
· For best results & proper care of your equipment use Stanton Vinyl Cleaner (VC-1) for your records and Stylus Cleaner Kit for styli (SC-4). · Clean the stylus periodically with a soft brush to prevent the accumulation of dust. · When the sound becomes distorted or noisy, check the stylus. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE STANTON STR8-100 TURNTABLE
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual STANTON STR8-100 TURNTABLE will begin.
