User manual STANTON STR8-150 TURNTABLE

[. . . ] Wall or Ceiling Mounting ­ The product should be mounted to a wall or ceiling only as recommended by the manufacturer. Heat ­ The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat. 9. Power Sources ­ This product should be operated only from the type of power source indicated on the rating label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. [. . . ] Unauthorized substitutions may result in fire, electric shock, or other hazards. Safety Check ­ Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. 24. Ensure a minimum distance of 5cm around the apparatus for sufficient ventilation. Ensure that the ventilation is not impeded by covering the ventilation openings with items, such as newspapers. Do not place naked flame sources, such as lighted candles the apparatus. Use the apparatus only in moderate climates (not in tropical climates) CAUTION CAUTION: To reduce the risk of electric shock, do not remove any cover. Refer servicing to qualified service personnel only. The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the use to the presence of un-insulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operation and maintenance (servicing) instructions in the literature accompanying this appliance. CAUTION To prevent electric shock, do not use this polarized plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure. ¡E device complies with Part 15 of the FCC Rules Operation is Subject to the following two conditions (1) This device may This not Cause harmful interference, and (2) this device must accept any Interference received. Including interference that may cause Undesired operation. ¡EThis Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. ¡EUnauthorized modification of this unit may cause it to no longer comply with FCC regulations and void your authority to use this device. ¡ECet appareil numé rique de la classe B respecte toutes les exigencies du Rèsur le materiel brouilleur du Canada. PART NAMES & FUNCTIONS 16 21 20 19 18 playback, gently place the stylus on the record using the headshell finger support. Do not drop the stylus onto the record as it may cause damage to the diamond tip and to the record. 1 17 14) PITCH ON/OFF The ON setting will allow use of the pitch adjust. When set of OFF, the pitch control will be locked at 0%. 15) TONE ARM BASE The tone arm base includes the height adjustment and tone arm rest. See ìtone arm and cartridge settingsî for proper adjustments. 16) POWER SWITCH This switch turns the power on or off, including the motor and audio signal. 17) COUNTERWEIGHT Use this to balance the tone arm and to adjust the stylus pressure. See ìtone arm and cartridge settingsî for proper adjustments. 18) LINE OUT L & R This is the standard analog output (RCA jacks) which can be connected either to a phono or line input on any DJ mixer, depending on the setting of the phono / line selector. Note: Key lock processing is only available when the LINE output is used. 19) PHONO/LINE SWITCH Note: Key lock and digital output processing is only available when the LINE output is used. 20) DIGITAL OUT Use this output to connect your STR8-150 to any SPDIF in equipped digital device such as a CD-R or Computer. [. . . ] This will allow the DJ to have the capability of changing the grounding scheme of the phono cartridge to avoid ground hum that may occur when using the turntable. The ST150/STR8-150 Turntable has been designed to operate with third pin safety ground, and should always be used when available. N E V E R R E M O V E T H I R D P I N GROUND FROM THE POWER CORD PROVIDED, IF NECESSARY, USE THE APPROPRIATE ADAPTER FOR PLUGGING INTO OUTLETS WHICH DO NOT PROVIDE THIRD PIN GROUND TERMINALS. For best operation of the ground lift, the following rules should be applied W h e n t h i r d p i n s a f e t y g r o u n d i s u s e d , set the ground lift switch to the lift position. [. . . ]