User manual STANTON T.120C

[. . . ] FULL MANUAL OPERATING INSTRUCTIONS DIRECT DRIVE TURNTABLE T. 12OC WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. IMPORTANT SAFETY INSTRUCTIONS 1. Read these Instructions ­ All the safety and operating instructions should be read before this product is operated. Keep these Instructions ­ The safety and operating instructions should be retained for future reference. Heed all Warnings ­ All warnings on the appliance and in the operating instructions should be adhered to. [. . . ] Y This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Y Unauthorized modification of this unit may cause it to no longer comply with FCC regulations and void your authority to use this device. Y Cet appareil numérique de la classe B respecte toutes les exigencies du Rèsur le materiel brouilleur du Canada. ASSEMBLY Remove all the parts from the box. Please check to make sure the following items are included with the main unit in the carton: (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) Platter Slip mat Counterweight 45-rpm adapter Headshell AC cord RCA cable Target light Operating instructions Cloth dust cover CONNECTIONS 1) Connect the power cord to an AC outlet. 2) Connect the RCA cable to the PHONO input of your mixer. You can also use a line input by setting the phono/line switch at the rear of the turntable to Line. TONE ARM AND CARTRIDGE SETTINGS The major cause of problems in sound and skipping on the vinyl is the lack of proper set up of the needle and turntable adjustments. The needle is designed to operate at a specific angle to the vinyl. The T. 120C has several adjustments to correctly position the needle to the vinyl. The first adjustment is the correct installation of the cartridge. Installation of cartridge: When installing a cartridge, refer to the operating instructions of that cartridge. During installation, attach the stylus protector to guard the stylus tip from damage. Connect the lead wires to the cartridge terminals. The terminals of most cartridges are color coded. Connect each lead wire to the terminal of the same color. White (L+) Left channel+ Blue (L-) Left channelRed (R+) Right channel+ Green (R-) Right channelYour cartridge is to be mounted into the headshell as pre the mounting instructions included with the cartridge. The Stanton 500, 680 and 890 series of cartridges require the use of the two screws mounting into the headshell. For your convenience, some of these products can be purchased already mounted and pre-adjusted from your local Stanton dealer. If you are using these 1/2" mounted products with a headshell in a mobile application or you are doing heavy scratching, May want to use an extra shell weight. The Master series of products (Trackmaster, Groovemaster, etc. ) are designed with their own mounting that eliminates the need for a separate headshell and the wiring to the cartridge. The body of the cartridge should be parallel with the centerline of the headshell-tone arm, when viewed from the front to the back. The second adjustment is at the installation of the cartridge-head-shell assembly into the tone arm tube lock. Holding the tone arm tube in one hand, insert the cartridge-headshell into the tube lock with the other hand. [. . . ] 9) PLATTER REVOLUTION SPEEDS (rpm) 33 rpm ­ Press 33 45 rpm ­ Press 45 78 rpm ­ Press 33 and 45 buttons simultaneously. To return to 33 or 45-rpm play mode, just press the desired button. TURNTABLE SECTION: Type Motor Speeds Wow and Flutter Pitch Controls Starting Torque Starting Time Braking Time Braking System Pitch Bend 3-speed full manual 16pole, 3phase, brushless DC motor 331/3 and 45rpm and 78rpm Less than 0. 1% WRMS (JIS WTD) with 331/3rpm +/- 8%, +/-25%, +/-50% More than 4. 5kgf. cm 0. 2~6 sec. (Adjustable) 0. 2~6 sec. (Adjustable) Electronic brake +/-6% SPECIFICATIONS Time for Speed Change Audio Output TONEARM SECTION: Type Effective Arm Length Tracking Error Angle Applicable Cartridge Weight Anti-skating Range High of Cue (First Track) Descend of Cue AUDIO SECTION: Preamp Frequency Response Preamp Distortion Preamp Noise Floor GENERAL SECTION: Power Supply Less than 0. 2 sec. from 331/3 to 78 rpm Phono/Line output Static balanced S shaped tone arm with detachable headshell 230mm Less than 3 degree 13~18g 0~3g 7. 5~10 mm 1~3 sec. [. . . ]