User manual STANTON T.55 USB

[. . . ] 0 3. 5 0. 5 IMPORTANT SAFETY PRECAUTIONS 1. Read Instructions - All the safety and operating instructions should be read before this product is operated. Retain Instructions - The safety and operating instructions should be retained for future reference. Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to. [. . . ] If you want to separate the recorded audio into different tracks, drag the cursor over a song segment in the waveform window to high light it, and then from the File menu select Export Selection As AIFF (Macintosh) or Wave (Windows). If you want to save it as an MP3 file, then choose Export Selection As MP3. You can remove silences at the start or end of the recording by draging the cursor over the silent region and then choosing Delete or Cut from the Edit windows. For a Macintosh, after you have recorded your track, burn them to a CD using the Mac OS X finder, or with other Macintosh CD creation programs. For Windows, use Windows Explorer or another Windows CD creation program to burn a CD. 7 CAKEWALK PYRO AUDIO CREATOR LE OVERVIEW (PC Users) The T. 55 USB comes with a complimentary CD with Cakewalk Pyro Audio Creator LE. Cakewalk Pyro Audio Creator LE allows you to create CD's directly from audio recorded from the T. 55 USB to a Windows-based PC. The system requirements for Pyro Audio Creator LE are below: System Requirements Operating System Processor Speed RAM Hard Disk Space Video resolution Hard Disk Type Audio Interface Optical Drive Requirements Minimum Windows XP Intel® Pentium® 4 1. 3 GHz, or AMD AthlonTM XP 1500+ or higher 256 MB 50 MB for core program 1024 X 768, 16-bit color Any Windows-compatible CD-ROM required for installation / CD-R or CD-RW capability required for CD audio disc burning Recommended Windows XP/Vista/Vista x64 Intel® Pentium® 4 2. 8 GHz [EM64T] or AMD AthlonTM 64 2800+ or higher 1 GB or higher 1 GB for program and content 1280 X 960, 32-bit color EIDE / Ultra DMA (7200 RPM) or SATA WDM- or ASIO-compatible, including Wave RT for Vista To start, insert your complimentary Cakewalk Pyro Audio Creator LE CD into your disc drive on your computer and follow the installation instructions to completely install the software on your operating system. Complete instructions on how to use all the features of the software are included in the Help Menu. To transfer and record LPs to your hard drive from your T. 55 USB, start by connecting your T. 55 USB to your computer using the included USB cable. Launch the Cakewalk Pyro Audio Creator LE application via the start menu. The Audio Creator Toolbar will now be available for use. Click the Options button at the top of the toolbar. This will allow you to select the T. 55 USB as the USB audio input. This will bring up the screen shown below. 1 2 For Playback Device, select your soundcard. For Recording Device, select: Stereo USB Audio CODEC. - After selecting this output you may monitor the recording via the RCA output on the T. 55 USB. The sampling rate for CD's is 44, 100 Hz, so it is best to choose this rate in the Sample Rate selection. The Driver Mode menu is used to select the driver (ASIO, MME or WDM) that you are using for your soundcard, (for the T. 55 USB, "MME (32-Bit) is suggested). Latency refers to how fast the software responds to commands. Higher latency values are safer when recording and playing back audio. Iif audio clicks or pops are heard when recording or playing back recordings, it is suggested to raise this setting. When you have completed choosing your settings, press OK to close the Options Window. These settings will be saved and should not need to be edited again. 8 RECORDING AUDIO FROM A RECORD 2. [. . . ] The online Help screens offer help about the various functions. You can find further help for all Stanton products online. The Stanton FAQ can be found at: http://www. stantondj. com/v2/spt_faq. asp The Stanton Knowledge Base can be found at: http://www. stantondj. com/activekb/ 18 SPECIFICATIONS General Dimensions Weight Power supply Model: T. 55 USB 452(W) x 370(D) x 87(H)mm 5. 4Kgs AC 100V, 50/60Hz (For Japan) AC 110V, 60Hz (For Taiwan) AC 120V, 60Hz (For U. S. A. , Canada, Mexico) AC 220V, 50Hz (For United Arab Emirates, Chile, Argentina) AC 220V, 60Hz (For Philippines) AC 230V, 50Hz (For Europe, New Zealand, South Africa, Singapore, Israel) AC 240V, 50Hz (For Australia, U. K. ) 6. 5W Power consumption Turntable Section Type Motor Driving Method Speeds Wow and Flutter S/N Ratio Pitch Controls Start Time Braking Time Time for Speed Change USB Function A/D, D/A Computer interface Tonearm Section Type Effective Arm Length Tracking Force Adjustment Range Applicable Cartridge Weight Needle Pressure Range 2-speed full manual DC motor Belt drive 331/3 and 45rpm Less than 0. 2% WRMS (JIS WTD) with 331/3rpm More than 50dB (DIN-B) +/-10% Less than 1 sec. USB Rec. /Play Function 16bit 44. 1KHz or 48KHz USB Selectable USB 1. 1 Compliant windows XP or MAC OS X Static balanced straight shaped tonearm with cardan's suspension 191mm 0~4g 5. 5g 2~5g Audio Section Phono Output Phono Frequency Response Channel Separation Channel Balance Line Output Line Frequency Response 2. 5~5. 0 mV at 1KHz 5cm/sec (HP-4005) 20Hz-20KHz +1/-3dB More than 14dB Within 2. 5dB at 1KHz 45~90 mV at 1KHz 5cm/sec (HP-4005) 20Hz-20KHz/RIAA filter +1/-3dB (IN:1KHz/4mV) 19 WARRANTY & RETURN POLICY Warranty Through Stanton's authorized dealers around the World, Stanton, or one of Stanton's authorized distributors outside the U. S. , will, without charge, repair or replace, at the sole discretion of the entity responsible for making the repair or providing the replacement, any Stanton merchandise proved defective in material or workmanship for a period of one year following the date of original purchase. [. . . ]