User manual STANTON T.62

[. . . ] Grounding or Polarization ­ This product may be equipped with a polarized alternation-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. [. . . ] 1) Remove the platter from its protective wrapping and place on the spindle of the main unit. 2) Remove the slipmat from its protective wrapping and place on the platter. 3) Place the counter-weight on the back of the tonearm assembly. 4) If desired place the 45rpm adaptor in its allocated holder on the main unit. PLACEMENT - Do not place the unit in a location where it will be exposed to direct sunlight or near a heating appliance. - Do not place the unit in a location where there is high humidity or a lot of dust. - Cartridge may pick up slight sound pressures or vibrations from the speakers coming along the floor or through the air resulting in feedback. Find a location which is very stable and vibration free. - The legs have functions for adjusting the height of the unit itself. Adjust the legs to stabilize the main body horizontally. CONNECTIONS To properly connect your T. 62, please follow these simple instructions: 1. Connect the RCA cable from the T. 62 Phono Output to your DJ Mixer Phono input. Connect the ground cable from the T. 62 ground post to your DJ Mixer ground terminal. . 5 . 3 0 0. 5 0 3 . 5 3 0 5 TONEARM AND CARTRIDGE SETTING The major cause of problems in sound and skipping on the vinyl is the lack of proper set up of the needle and turntable adjustments. The needle is designed to operate at a specific angle to the vinyl. The T. 62 has two adjustments to correctly position the needle to the vinyl. The first adjustment is the installation of the cartridge-head-shell assembly into the tone arm tube lock. The T. 62 includes a Stanton 500 V3 cartridge pre-mounted to the headshell. Holding the tone arm tube in one hand, insert the cartridge-headshell into the tube lock with the other hand. Turn the lock ring clockwise (when viewed from the rear) until the headshell is locked tightly into the tone arm. Remove the needle protector from the cartridge and place the needle on record. View the needle from the front and insure that the needle is perpendicular to the record surface. If some adjustment is needed, simply loosen the lock ring and rotate the cartridge headshell until the needle is perpendicular to the record surface. Then re-tighten the lock ring. Locking Ring CONNECTIONS 1 2. [. . . ] To the extent permitted by law and except as otherwise provided above, Stanton disclaims any express or implied warranties of merchantability or fitness for a particular purpose. The above warranty provides you with specific legal rights. You may also have additional rights, which are subject to variation from state to state and country to country. If there is a dispute regarding the warranty of merchandise that does not fall under the warranty conditions stated above, please include a written explanation with the merchandise when returned pursuant to the terms and conditions set forth herein. [. . . ]