User manual STARNEX SELF-GUARD SG-3000

[. . . ] The Smallest, Wireless, Mobile, and Covert DVR in the World Unpacking Check to make sure that all of the items shown below are included with your Self- SELF-GUARDTM (Professional Version: SG-1000, SG-2000, and SG-3000) Guard. If something is missing, contact your dealer as soon as possible. User's Guide Thank you for purchasing this Self-Guard product. Before using it, be sure to read the precautions contained in the User's Guide. Keep the User's Guide in a safe place for future reference. [. . . ] EXT MIC : OFF This function turns on and off audio recording function, and you can select either a built-in microphone or an external microphone. When you turn on "3. EXT MIC", be sure that there is an external microphone connected to the external microphone input port to record audio. Set off "1. AUDIO" to record video only. SIZE (Image Resolution for Recording) This function adjusts the resolution of images. The ranges of the resolution are 128x128, 160x128, 240x240, 320x240, 480x480, and 640x480 pixels. OVERWRITE (Overwrite when memory is full) O O O O O X O O O O X O X O X O O O O O ALL EDIT CLEAR SAVE If you set this Overwrite function to on, then the oldest file in dates gets replaced by the new file being recorded, enabling the Self-Guard to continue to record when the memory is full. If this function is off, and the memory is full with the existing files, then the Self-Guard stops from recording the images, and returns back to the initial menu mode, displaying "STOP!Press any button to remove this message from the screen. OPTION" mode "F. OHERS" ALL: Select all blocks CLEAR: Cancel all blocks EDIT: Select/Cancel blocks 43 44 "c. POWER SET") is not set to "0 minute" but instead, set to "1-9 minutes", then the Self-Guard automatically turns off its power after the selected time has elapsed. BUILT-IN Types of Memory Built-in Flash Memory RS-MMC Additional Memory Card USB USB Memory Stick or USB Hard Disk 1. ALL DAY : ON 08-11 : OFF 11-14 : OFF 14-17 : OFF 17-20 : OFF EDIT Memory Usage Sequence when "OVERWRITE" is "ON" BUILT-IN O O O O RS-MMC O O USB O O Memory Usage Sequence BUILT-IN BUILT-IN BUILT-IN RS-MMC BUILT-IN BUILT-IN USB BUILT-IN BUILT-IN RS-MMC USB BUILT-IN 1. ALL DAY If you turn on this option, then the Self-Guard records for 24 hours, all day long continuously. 00-05 : OFF Recording time schedule number 1. Press [ENT] then the next screen appears in the LCD as below. You can change for the time using direction buttons. Memory Usage Sequence when "OVERWRITE" is "OFF" BUILT-IN O O O O e. SCHEDULE You can program the Self-Guard to reserve recording time schedule in 4 time frames for a day. Press [] or [] to turn ON and OFF each schedule. You can preset each schedule by pressing the [ENT]. If you turn off all options in the schedule menu, then the Self-Guard turns on "1. ALL DAY" automatically. If you go into the Record Mode outside of the preset recording time, then the LCD displays with "CHECK SCHEDULE" message for 5 seconds, and goes into the sleep mode. When the time becomes for the preset time schedule, Self-Guard exits from the Sleep mode and starts to record. If you press [ESC] or [ENT] when the Self-Guard is in the sleep mode, then the LCD will display with a message, "CHECK SCHEDULE" for 5 seconds. [. . . ] If there is an electricity (a power) failure, Self-Guard automatically starts to use the power from its battery. But the Self-Guard turns off its power, when it is not provided with the power from the adaptor for a long time, and uses up the whole battery. And as soon as the electricity is available to the Self-Guard, it automatically starts to charge the battery with electricity, and returns back to the modes just before it turned off its power ("RECORD", "TRANSMIT", or to the initial mode). This function is very useful when you have installed the Self-Guard in the remote places far away from you. [. . . ]