User manual STEINEL DUAL HF COM 1 AP

[. . . ] 25 Cleaning the exterior and control panel . 27 2 Contents Cleaning and Care . 29 The program was canceled, the buzzer sounds and the "Start" button flashes. 30 An error message is displayed at the end of a program. [. . . ] Danger of injury and damage to the machine! 22 Using the washer Canceling a program A program can be canceled any time after a program start. Interrupting a program ^ Press the "Pause" button briefly. ^ Press the "Pause" button until the "STATUS" indicator "Drain/Spin" indicator lights. To add or remove laundry ^ Open the drum door. To select another program ^ Select a new program with the e buttons. The washer interrupts the program and unlocks the door. Continue: ^ Tap the "Start" button. Changing a program A program change is not possible after a program has started. To change a program, the program must be canceled first. Adjusting the temperature The temperature can be changed up to 6 minutes after the program start. Adjusting the spin speed The spin speed can be adjusted anytime until the beginning of the final spin. Changing an option The options "Extended or Sensitive" can be selected up to 6 minutes after the program start. The "Buzzer" can be selected or deselected at any time. 23 Using the washer Adding/removing laundry during a wash program The drum door cannot be opened if: ­ the water temperature is greater than 130°F (55°C). ­ the program has reached the "Final Spin". ^ Press briefly the "Pause" button. The program will continue automatically. Unload the laundry ^ Open the drum door. ^ Add detergent in the respective compartments. Check the drum for any missed pieces of laundry. Items inadvertently left in the washer may be damaged (e. g. shrink or discolor) during the next wash cycle. Quick guide Program guide No ld Ho w Slo Me Hi Ma No ld Co Wa ry Ve t Ho iz nit Sa e gh d x rm in Sp He Wa at Normal Wrinkle-free Sanitize Extra White Delicates Woolens Express Sturdy Custom Clean Machine X X X X X X X X rm X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X Options Wo Ex St Ex Cu De No rm al Cl Wr ink lefre Sa nit ize ur ea pr tra lic ate s ite sto ole dy nM es Wh m ns s ac hin Extended Pre-wash Sensitive Buzzer X X X X The default settings are highlighted in bold. e e X X X X X X X X X X X X X X X X X X X X X X X X X Cleaning and Care Siphon tube and channel Cleaning the detergent drawer niche 1. Remove the siphon tube from the "Softener" compartment and rinse under warm water. Also clean the pipe connected to the siphon tube. Put the siphon tube back into place. ^ Use a bottle brush to remove any detergent residue and lime deposits from the jets inside the detergent drawer. ^ Slide the drawer back into place. ^ Clean the fabric softener channel with warm water and a brush. Clean the siphon tube and fabric softener channel more often if you frequently use liquid starch. Liquid starch tends to build up. 27 Cleaning and Care Cleaning the water inlet filters The washer has two water inlet filters to protect each inlet valve. [. . . ] Tips for a hot water connection The hot water temperature from the hot water valve must not exceed 140°F (60°C); the ideal temperature is 130°F (55°C). If there is no water pressure at the hot water inlet, the unit will automatically switch to cold water after several minutes. 46 Plumbing Drainage The 5 ft (1. 5 m) drain hose may be connected as follows: 1. Directly into a sink: hook the hose over the edge of the sink and secure it firmly (e. g. To a stand pipe: place the drain hose into a 1 ½" (4 cm) stand pipe and secure it firmly. [. . . ]