User manual STEINEL HF 360 COM 2

[. . . ] 26 Adding/removing laundry during a wash program . 27 Cleaning the exterior and control panel . 29 2 Contents Cleaning and care . 35 Opening the door during a power failure or when the drain is blocked . [. . . ] The program must be canceled. Adjusting the temperature The temperature can be changed up to 6 minutes after the program start. ^ Press and hold the "Cancel" button until the display shows: Cancel Adjusting the spin speed The spin speed can be adjusted anytime until the beginning of the final spin. Adjusting the options The wash water will be drained away. To add or remove laundry ^ Open the drum door. To select another program The display requests the program selection. The options "Extended" or "Sensitive" can be selected or deselected up to 6 minutes after the program start. The "Buzzer" option can be selected or deselected at any time. 25 Using the washer Preparing your appliance for an extended vacation If you elect to turn off the water to your home for an extended period of time, please note that this may not be enough to reduce the risk of a leak. To be completely safe, you must turn off the water supply to each individual appliance. This means under the sink for a dishwasher, at the laundry bib for your washer, etc. The drum door cannot be opened if: ­ the water temperature is greater than 130°F (55°C). ­ the program has reached the "Final Spin". ­ The Child Lock function is activated. Selecting a temperature The preselected temperature and/or spin speed can be adjusted if the program allows so. ^ Press the "On/Off" button. The washer is turned on and the program indicators light. Load the laundry Duration: MG G P G G GM Warm 1:02 h MG G G G P GM High spin By pressing the left button the temperature will be adjusted. Pressing the right button modifies the spin speed. ^ Press the "Door" button and load the laundry. To prevent damage to the door seal and clothing, make sure that there are no clothes caught between the drum door and the seal. Quick guide 6. Selecting Delay Start ^ Press the "m" delay start button. Start in: MG G P G G GM Warm 1:02 h MG G G G P GM High spin ^ With every touch of the "m" delay start" button, the start is delayed longer. Starting a program ^ Select the desired Option with the respective button. Once an Option is selected, the indicator lights. Add detergent ^ Press the flashing "Start" button. Activating the Child Lock ^ Press and hold the "Heavy Soil" button until the display shows: X Locked ^ Deactivate the Child Lock after the program has finished. [. . . ] Tips for a hot water connection The hot water temperature from the hot water valve must not exceed 140°F (60°C); the ideal temperature is 130°F (55°C). If there is no water pressure at the hot water inlet, the unit will automatically switch to cold water after several minutes. 51 Plumbing Drainage The 5 ft (1. 5 m) drain hose may be connected as follows: 1. Directly into a sink: hook the hose over the edge of the sink and secure it firmly (e. g. To a stand pipe: place the drain hose into a 1 ½" (4 cm) stand pipe and secure it firmly. [. . . ]